vBoot Mode Menu

The Boot Mode Menu allows you to select a boot mode.

Boot Mode Menu

1.Boot to SMS Menu: Currently Disabled

2.Service Mode Boot from Saved List: Currently Disabled

3.Service Mode Boot from Default List: Currently Disabled

4.Boot to Open Firmware Prompt: Currently Disabled

98.Return to Previous Menu

0>

To select a boot mode, select a number and press Enter. The item corresponding to the selected number toggles between Disabled to Enabled. If a boot mode is Enabled, the boot mode selected is performed, and the Disabled/Enabled selection is reset to Disabled. The following describes each boot mode:

±Boot to SMS Menu

When this selection is enabled, the system boots to the System Management Services (SMS) Menu.

±Service Mode Boot from Saved List

This selection causes the system to perform a service mode boot using the service mode boot list saved in NVRAM. If the system boots AIX from the disk drive and AIX diagnostics are loaded on the disk drive, AIX boots to the diagnostics menu.

Using this option to boot the system is the preferred way to run online diagnostics.

±Service Mode Boot from Default List

This selection is similar to Service Mode Boot from Saved List, except the system boots using the default boot list that is stored in the system firmware. This is normally used to try to boot customer diagnostics from the CD-ROM drive.

Using this option to boot the system is the preferred way to run standalone diagnostics.

±Boot to Open Firmware

This option should only be used by service personnel to obtain additional debug information. When this selection is enabled, the system boots to the open firmware prompt.

44pSeries 630 Model 6C4 and Model 6E4 User's Guide

Page 62
Image 62
IBM 6C4 Boot Mode Menu, ± Boot to SMS Menu, ± Service Mode Boot from Saved List, ± Service Mode Boot from Default List