
Modem Configuration Menu
Note: This option applies only to a modem attached to serial port 1 (S1) or serial port 2 (S2) on the CEC backplane.
The first two lines of the Modem Configuration Menu contain status of the current selections. Selections are made in the sections labeled Modem Ports and Modem Configuration File Name. Select the serial port that you want to activate and then select the modem configuration file for the modem on the port. If you want to set up all of the serial ports with modems, make your selections one port at a time.
Modem Configuration Menu
Port 1 Modem Configuration File Name:
Port 2 Modem Configuration File Name:
To make changes, First select the port and then the configuration file name
Modem | Ports: |
|
|
1. | Serial port 1 |
|
|
2. | Serial port 2 |
|
|
Modem | Configuration File Name: |
| |
5. | none9. modem_z_sp |
|
|
6. | modem_f_sp | 10. | modem_m1_sp |
7. | modem_f0_sp | 11. | modem_m0_sp |
8. | modem_f1_sp | 12. | modem_m1_sp |
30.Save configuration to NVRAM and Configure modem
98.Return to Previous Menu
0>
For information on choosing a modem configuration file, see ªSample Modem Configuration Filesº on page 183 and ªTransfer of a Modem Sessionº on page 189.
Chapter 3. Using the Service Processor 53