Appendix E. Service Processor Setup and Test
For your convenience, an example of a basic service processor setup checklist is included here. Your setup may include more or fewer of the available features, so you can adjust this checklist for your own application so that it is helpful to you.
Service Processor Setup Checklist
1.Unplug the power cord from the server.
2.Attach a local terminal for this setup procedure.
3.Plug in the system and power on the local terminal. Attention: Make sure that system power remains off.
4.Start the service processor menus. See Chapter 3, ªUsing the Service Processorº on page 27.
5.Set the system name. See ªPrivileged User Menusº on page 31.
6.Enable surveillance. See 36.
7.Configure
8.Exit the service processor menus.
9.Unplug the power cord from the system.
10.Attach modems (if needed). See ªAccessing the Service Processor Menus Remotelyº on page 28.
11.Plug in the system.
Attention: Make sure that the system power remains off.
12.Test both of the following:
v
v
Your service processor is now ready for use.
179
