Return to the ªTelephone Number Setup Menuº on page 55 to enter the actual telephone numbers your server will use for reporting problems.
Serial Port Configuration
To configure the serial port on an AIX system, run the following from an AIX console:
1.Log in as root user.
2.To determine if you have any serial ports already configured, type: lsdev
If no serial ports are configured, none are listed. If you want to configure serial ports that are not listed, continue with the remaining steps.
3.Identify the serial port(s) with the modem(s).
4.Type smit tty
5.Select add tty
6.Select RS232
7.Select Baud rate 9600 or higher.
8.Select login enable and set the flow control to RTS.
9.Commit the selections and set up any other needed serial ports.
10.Exit SMIT.
Appendix E. Service Processor Setup and Test 181