Mitsubishi Electronics FR-V500 instruction manual Setting the m otor, Setting the motor

Setting the motor

2.3 Setting the m otor

This inverter is factory-set to run the dedicated motor (SF-V5R (1500r/min series) with PLG)

(It is not necessary to reset the inverter if you use the dedicated motor (SF-V5R (1500r/min series) with PLG) (only when inverter capacity = motor capacity).)

POINT

The parameter below is extended mode parameter. Set "1" in Pr. 160 "extended function selection".

2.3.1Dedicated motor (SF-V5R (1500r/min series))

1Check that the Pr.71 "applied motor" (extended mode) setting is "30" (SF-V5R) (factory setting value).

2.3.2Motor one rank lower than the dedicated motor (SF-V5R (1500r/min series))

(1) Set the parameter shown below.

Parameter	Name	Factory Setting	Setting Range
80	Motor capacity	Inverter capacity	0.4kW to 55kW

19