Mitsubishi Electronics FR-V500 Names and functions of the operation panel, Key indication

Names and functions of the opera- tion panel

3.3 Names and functions of the operation panel

With the operation panel (FR-DU04-1), you can perform operation, set the speed, monitor the operation command display, set parameters, display an error, and copy parameters.

		CONTROL PANEL		Unit indication
				Hz/r (motor speed)
			Hz/r
				A (current)
isplay			A
				V (voltage)
ED 4 digits			V
	MON	EXT	PU	Operation status indication
		REV	FWD
Mode key	MODE	REV	FWD
			STOP	Forward rotation key
	SET			Reverse rotation key
		RESET
etting key	Up/down keys			Stop/reset key

REMARKS

The ON of the LED is indicated by", and OFF by!.

!Key indication

Key	Description
MODE	Select the operation mode or setting mode.
SET	Determine the speed or parameter setting.
	• Used to increase or decrease the running speed consecutively. Hold down this key to change the
	speed.
	• Press this key in the setting mode to change the parameter setting consecutively.
FWD	Forward rotation command key.
REV	Reverse rotation command key.
STOP	• Used to stop operation.
	• Used to reset the inverter when the protective function (major fault) is activated to stop the output.
RESET

!Unit indication, operation status indication

Indication	Description
Hz/r	Lit to indicate the output speed.
A	Lit to indicate the current.
V	Lit to indicate the voltage.
MON	Lit in the monitor display mode.
PU	Lit in the PU operation mode.
EXT	Lit in the external operation mode.
FWD	Flickers during forward rotation.
REV	Flickers during reverse rotation.

3

RUN AND OPERATION

26