Mitsubishi Electronics FR-V500 Refer to page 43 for details, Pr control system selection

Function list (Simple mode parameters)

Pr. 160 "extended function display selection"

!Set this parameter to display/set the extended function parameters.

Setting	Description
0	Only the simple mode parameters are displayed.
1	All parameters are displayed.

REMARKS

Refer to page 54 for the parameters (extended function parameters) available when "1" is set in Pr. 160 "extended function dis- play selection".

Pr. 800 "control system selection"

Select the inverter control system such as speed control, torque control or position control.

Setting	Drive System	Control Method	Remarks
0		Speed control	Factory setting
(factory setting)
1		Torque control	
2		Speed control-torque control	MC ON: Torque control
		switchover	MC OFF: Speed control
	PLG vector control
3		Position control	
4		Speed control-position control	MC ON: Position control
		switchover	MC OFF: Speed control
5		Position control-torque control	MC ON: Torque control
		switchover	MC OFF: Position control
20	V/F control	Speed control	

Related parameters

M C signal term inal assignm ent ⇒ Set "26" in any of Pr. 180 to Pr. 183 and Pr. 187 (input term inal function selection). (Refer to page 61.)

REMARKS

Set the control system selection of the second motor in Pr. 451 "second motor control method selection". Refer to the Instruc- tion Manual (detailed) for details.

Pr. 818 "easy gain tuning response level setting", Pr. 819 "easy gain tuning"

Refer to page 43 for details.

53