Mitsubishi Electronics FR-V500 Deceleration pattern, Regenerative, Speed jump 1A, Speed jump 1B

PARAMETERS

Function list (Extended function parameters)

						At-a-glance Guide to Func-
							tions
						": Usable function
Function	Parameter				Cus-	×: Unusable function
						* : Functions that can be used
		Name	Outline	Factory	tomer
						for param eter-set position con-
				Setting	Set-
							trol
					ting
						Vector Control
						Speed	Torque	Position
						control	control	control
			Determines the frequency changing pattern for acceleration/deceleration.
		Acceleration/	0: Linear acceleration/deceleration
	29		1: S-pattern acceleration/deceleration A	0		"	"	×
		deceleration pattern	2: S-pattern acceleration/deceleration B
			3: Backlash compensation acceleration/deceleration
functions			4: S-pattern acceleration/deceleration C
	30	function selection	1: Brake resistor (FR-ABR)	0		"	"	"
		Regenerative	Set when using the FR-ABR, FR-HC or FR-CV option for frequent start/stop operation.
selection			0: Internal brake resistor, brake unit
			2: High power factor converter (FR-HC), power return common converter (FR-CV)
	31	Speed jump 1A		9999		"	"	×
Operation	32	Speed jump 1B		9999		"	"	×
			0 to 3600r/min, 9999
	34	Speed jump 2B		9999		"	"	×
	33	Speed jump 2A	Set the speed ranges you want to avoid during constant-speed operation to avoid	9999		"	"	×
			resonance with the machine.
	35	Speed jump 3A		9999		"	"	×
	36	Speed jump 3B		9999		"	"	×
	37	Speed display	You can set the speed as a machine speed.	0		"	"	"
			0, 1 to 9998
	41	Up-to-speed	You can adjust the output signal on/off range when the output speed reaches the			"	×	×
Outputterminal functions			running speed.	10%
	43	Speed detection for	transfer and other applications.	9999		"	"	"
		sensitivity	0 to 100%
	42	Speed detection	You can adjust the speed detected.	300r/min		"	"	"
			0 to 3600r/min
			You can change the speed detection level for forward or reverse rotation in vertical lift,
		reverse rotation	0 to 3600r/min, 9999
functions	44	Second acceleration/	Second function of the acceleration/deceleration time set in Pr. 7, Pr. 8.	5s		"	"	× *
		deceleration time	0 to 3600s/0 to 360s
Second	45	Second deceleration	Second function of the deceleration time set in Pr. 8.	9999		"	"	× *
		time	0 to 3600s/0 to 360s, 9999
Outputterminal functions	50	Second speed	Set the speed at which the FB2 signal is output.	750r/min		"	"	"
		detection	0 to 3600r/min
			You can select the DU/PU main display data.
			0, 100: Speed, output current, output voltage, alarm display
			5: Preset speed
			6: Output frequency
			7: Motor torque
			8: Converter output voltage
			9: Regenerative brake duty
			10: Electronic thermal relay load factor
			11: Output current peak value
	52	DU/PU main display	12: Converter output voltage peak value			"	"	"
			17: Load meter	0
		data selection	18: Motor exciting current
			19: Position pulse
			20: Cumulative energization time
functions			23: Actual operation time
			24: Motor load factor
			32: Torque command
			33: Torque current command
Display			34: Motor output
			35: Feedback pulse
			38: Trace status
			You can select the PU level display data.
			0: No monitor
			1: Speed
			2: Output current
			3: Output voltage
			5: Preset speed
	53	PU level display data	6: Output frequency	1		"	"	"
		selection	7: Motor torque
			8: Converter output voltage
			9: Regenerative brake duty
			10: Electronic thermal relay load factor
			11: Output current peak value
			12: Converter output voltage peak value
			17: Load meter
			18: Motor exciting current

55