Mitsubishi Electronics FR-V500 Parameter Name Factory Setting Setting Range Remarks

Connection diagram, PLG cable, PU connector

(2)Setting the number of PLG pulses and PLG rotation direction Set the following parameters according to the PLG specification.

Parameter	Name	Factory Setting	Setting Range	Remarks
851	Number of PLG pulses	2048	0 to 4096	Extension
852	PLG rotation direction	1	0, 1	mode

!The rotation direction monitor of the parameter unit displays the rotation direction of the encoder, refer to the following table.

Pr. 852 Setting	Relationship between the motor and PLG
		CW
0		A
	PLG

1

Forward rotation is clockwise rotation when viewed from A.

CCW

A

PLG

(factory setting)

Forward rotation is counterclockwise rotation when viewed from A.

REMARKS

•By setting "1" in Pr.160 "extended function selection", Pr. 851 and Pr. 852 are made valid.

•The number of PLG pulses should be between 1000 and 4096.

!When using a conventional motor and a PLG cable (FR-VCBL/FR-JCBL), refer to the Instruction Manual (detailed).

13