Lantronix 2100E manual Connect Mode Passive Connection

4: Web Manager Configuration

Figure 4-6. TCP Connection Settings

Connect Mode: Passive Connection

Accept Incoming	Select Yes to accept incoming connections.
Password Required	Determines whether a password is required for an incoming passive
	connection. This field is not available when a password is set for Telnet
	mode. The default setting is No.
Password	If Password Required was set to Yes, enter the password for passive
	connections.
Modem Escape	Disable or enable the unit's ability to send the escape sequence. The
Sequence Pass	default is Y (Yes) (send the escape sequence).
Through

WiBox® 2100E Device Server User Guide 36