4: Web Manager Configuration

Figure 4-7. UDP Connection Settings

2. In the available fields, enter the following information:

Datagram Mode

Datagram Type

Configures remote IP or network broadcast address and the remote

 

port. Enter 01 for directed or broadcast UDP. The default setting is 00.

 

 

Accept Incoming

Select Yes to accept incoming UDP datagrams.

 

 

Endpoint Configuration

Local Port

Enter the local port number.

 

 

Remote Port

Enter the port number of the remote device.

 

 

Remote Host

Enter the IP address of the remote device.

 

 

Use Broadcast

Select to broadcast the UDP datagram. Datagrams of type 01 can be

 

sent as a broadcast by enabling this option. The default is not to

 

broadcast.

 

Note: Datagrams are sent as subnet-directed broadcasts.

 

 

Device Address Table

Enter values in the range 1-255 to identify units on the local network of

 

device servers.

 

Note: Lantronix Tech Support supports Datagram type 01. Datagram

 

type FD is for OEM use. This table is enabled when Datagram Type is

 

set to FD.

 

 

WiBox® 2100E Device Server User Guide

39

Page 39
Image 39
Lantronix 2100E manual Datagram Mode, Datagram Type, Use Broadcast, Device Address Table