Sylvania LC427SSX owner manual 5Still Mode, 5Switching Each Input Mode, 5Switching Audio Mode

English

5Still Mode

You can pause the image shown on the TV screen.

Press [STILL] to pause the image shown on the TV screen.

Still

•The sound output will not be paused.

•If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted.

•The still function will be released after 5 minutes.

To cancel still mode, press any button except [POWER].

5Switching Each Input Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access external devices when they are connected to the unit.

Press [INPUT SELECT] or [CH K] repeatedly to cycle through the input modes.

Input Select

TV

Video1

Video2

Component

HDMI1

HDMI2

HDMI3

DTV/TV channel

Video1

or

Video2

Component

HDMI1 (or PC input)

HDMI2

HDMI3

•Pressing [CHL] reverses the direction of the input modes.

5Switching Audio Mode						INTRODUCTION
This section describes how to switch the audio in the analog mode and how
to switch the audio language in the digital mode.
TV
Press [AUDIO] to display the currently selected						PREPARATION
audio mode. While receiving an MTS broadcast,
press repeatedly to cycle through the available audio
channel.
			11
			SAP / STEREO
When all audio are available						WATCHING
SAP / STEREO					SAP / MONO
		SAP / STEREO				TV
When stereo and monaural audio are available
MONO / STEREO					MONO / STEREO
						OPTIONAL
SAP / MONO					SAP / MONO
When SAP and monaural audio are available
						SETTING
		MONO
When only monaural audio is available
		(cannot be switched)
STEREO	TROUBLESHOOTING
		: Outputs stereo-audio
SAP	: Outputs second audio program
MONO	: Outputs mono-audio
DTV
1 Press [AUDIO] to display the currently selected
						INFORMATION
language and the number of available languages.
			11-1
				English 1/3

2Press [AUDIO] repeatedly to cycle through the available audio languages.

•Available languages differ depending on the broadcast. “Other” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.

Note:

•[AUDIO] does not control external audio devices.

•The information display will automatically disappear in a few seconds.

15

EN