Regency FireGenie operating instructions Exiting Program Mode, Next day of the week flashes

The “Day”, “Set Temperature” and “Prog 2” will all begin to flash simultaneuosly, indicating that Copy Mode has been activated.

Pressing and releasing the “+” button will select the Day(s) of which the program is to copy to.

Pressing and releasing the “-” button will confirm the copying process in which the original program will copy across to the selected day(s).

The next day of the week flashes.

2

Once the programs have been copied over to the other days of the week, the Remote Control will automatically return to normal Program mode after the last button is released, after approximately 20 seconds.

8) Exiting Program Mode

There are 2 ways to exit Program Mode;

1)The Remote Control will automatically exit the Program mode 20 seconds after the last button is released or

2)By pressing the ON/OFF button twice, the Remote Control will return to the last operating mode.

14 FPI FireGenieTM Remote Control Manual