Regency FireGenie

FPI FireGenieTM Remote Control Manual 13

Time Zone 2 Set Temperature

Programming of Time Zone 2

6) Programming the Set Temperature of Time Period 2

Press and release the PROG button one more time to program the Set Temperature of Time Period 2.

Use the + and - buttons to adjust the temperature setting.

See step 7b) immediately if you would like to copy the set program over to other days of the week.

7a) Programming the Rest of the Week

Repeat steps 2 to 6 until all 7 days have been programmed.

7b) Alternatively, Copy Programs Over to the Other Days

While the Set Temperature of Time Period 2 is still flashing, pressing and holding the PROG button for

2 seconds or longer will initiate the copying process.

Time Period 2 Set Temperature

Programming of Time Period 2

Time Period 2 Set Temperature

is flashing.

Contents

Main FCC Requirements Canadian Equipment Requirements TABLE OF CONTENTS IMPORTANT MATCHING REMOTE CONTROL & RECEIVER ID CODE REMOTE CONTROL KEYPAD REMOTE CONTROL SCREEN DISPLAY (LCD) REMOTE CONTROL BASIC FUNCTIONS Switching the Remote ON & OFF RECEIVER OPERATION Setting Time & Day AUTO MODE MANUAL MODE ADVANCED FUNCTION - PROGRAM MODE Programming of Time Zone 1 Time Zone 1 On-Time SETTING THE PROGRAM MODE 1) Programming the On-Time of Time Period 1 Time Zone 1 Off-Time Programming of Time Zone 1 2) Programming the Off-Time of Time Period 1 Programming of Time Zone 2 Time Zone 2 On-Time 4) Programming the On-Time of Time Period 2 Page 8) Exiting Program Mode INSTALLING THE RECEIVER Installing the Receiver to a Wall Mount Installing the Receiver to a Fireplace Page TROUBLESHOOTING Battery Replacement Displaying Temperature in Celsius or Fahrenheit Special Conditions in Program Mode Page Page Page Page IMPORTANT!