Setting Time & Day

Note: The Remote Control Keypad must be “ON” in order to set the Time & Day.

Time

Press and hold the “TIME” button for 2 seconds and then use the “+” button to set the hour and use the “-” button to set the minute.

Day

Press the “TIME” button again and use the “+” or “-” button to set the day.

Press the “TIME” button once more to record the setting.

RECEIVER OPERATION

The Remote Receiver has 3 operating modes, namely ON, OFF and Remote. The operating mode is selected by means of a slide switch on the front panel of the Receiver.

ON: When “ON” Mode is selected, the flame will turn ON.

OFF: When “OFF” Mode is selected, the flame will turn OFF. However, the unit can be turned ON or OFF with the standard ON/OFF switch.

Remote: When Remote Mode is selected, the Receiver will turn the flame ON or OFF depending on the setting of the Remote Control.

Receiver

FPI FireGenieTM Remote Control Manual

7

Page 7
Image 7
Regency FireGenie operating instructions Receiver Operation, Setting Time & Day