Sylvania LC427SSX owner manual 5Plug In the AC Power Cord, USB Flash Memory

PREPARATION

Supplied accessories used in this connection are as follows:

•cable management tie x 1

•AC power cord x 1

[USB Flash Memory] 5Cable Management

This unit offers easy playback JPEG pictures and MP3 musics.

Insert the USB flash memory to the USB terminal shown as below. For more details, refer to “JPEG/MP3 Playback” on page 32.

Attach the supplied cable management tie first into the holes on the lower side of the rear of this unit shown as below. Keep the cables through this holder to avoid tangle them.

rear of this unit

side of this unit

Note:

• The USB flash memory is not supplied with this unit.

• Do not use an extension cord between the USB flash memory and the unit. Always insert the USB flash memory to this unit directly.

•We do not guarantee the all USB flash memory can be supported on this unit.

•Be sure to keep a back up copy of the original files on your device before you play them back on this unit.

We have no responsibilities for damage or loss of your stored data.

•When you ready to remove a USB flash memory, at first turn off the unit to avoid any damage for your data and the unit.

•If the USB flash memory left behind in the USB terminal and you turn off the unit, the “USB”(main menu) will appear automatically when you turn on the unit again.

5Plug In the AC Power Cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed.

rear of this unit

AC power cord

AC outlet

Caution:

•Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V). Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.

Note:

• Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.

12

EN