HP UX Identity Security Software manual Restart-slapd Restarts the Directory Server

M1 = host1.example.com:10011

C1 = host4.example.com:10021

C2 = host2.example.com:10022

[color]

0 = #ccffcc

5 = #FFFFCC

60 = #FFCCCC

A shadow port can be set in the replication monitor configuration file. For example:

host:port=shadowport:binddn:bindpwd:bindcert

When the replication monitor finds a replication agreement that uses the specified port, it will use the shadow port to connect to retrieve statistics.

7.3.12 restart-slapd (Restarts the Directory Server)

Restarts the Directory Server.

Syntax restart-slapd

Options There are no options for this script.

Exit Status

Table 7-13 restart-slapd exit status codes

Exit Code	Description
0	Server restarted successfully.
1	Server could not be started.
2	Server restarted successfully but was already
	stopped.
3	Server could not be stopped.

7.3.13 restoreconfig (Restores Administration Server configuration)

Restores, by default, the most recently saved Administration Server configuration information to the NetscapeRoot partition under the /etc/opt/dirsrv/slapd-instance_name/ directory.

To restore the Administration Server configuration, do the following:

1.Stop the Directory Server.

2.Run the restoreconfig script.

3.Restart the Directory Server.

4.Restart the Administration Server for the changes to be taken into account.

Syntax restoreconfig

Options There are no options for this script.

7.3.14 saveconfig (Saves Administration Server configuration)

Saves Administration Server configuration information to /var/opt/dirsrv/slapd-instance_name/bak directory.

This script will only run if the server is running.

Syntax saveconfig

Options There are no options for this script.

224 Command-line scripts