HP UX Identity Security Software 2.3.10 cn=monitor

ParameterDescription

SyntaxDirectoryString

Example nsDS7NewWinUserSyncEnabled: on

2.3.9.5 nsds7WindowsDomain

This attribute sets the name of the Windows domain to which the Windows sync peer belongs.

Parameter	Description
Entry DN	cn=syncAgreementName, cn=replica, cn=suffixDN, cn=mapping tree, cn=config
Valid Values	Any valid domain name
Default Value
Syntax	DirectoryString
Example	nsDS7WinndowsDomain: DOMAINWORLD

2.3.9.6 nsds7WindowsReplicaSubtree

The suffix or DN of the Windows subtree that is being synchronized.

Parameter	Description
Entry DN	cn=syncAgreementName, cn=replica, cn=suffixDN, cn=mapping tree, cn=config
Valid Values	Any valid suffix or subsuffix
Default Value
Syntax	DirectoryString
Example	nsDS7WindowsReplicaSubtree: cn=Users, dc=domain, dc=com

2.3.9.7 winSyncInterval

This attribute sets how frequently, in seconds, the Directory Server polls the Windows sync peer to look for changes in the Active Directory entries. If this entry is not set, the Directory Server checks the Windows server every five (5) minutes, meaning the default value is 300 (300 seconds).

This value can be set lower to write Active Directory changes over to the Directory Server faster or raised if the directory searches are taking too long.

Parameter	Description
Entry DN	cn=syncAgreementName, cn=replica, cn=suffixDN, cn=mapping tree, cn=config
Valid Values	1 to the maximum 32-bit integer value (2147483647)
Default Value	300
Syntax	Integer
Example	winSyncInterval: 600

2.3.10 cn=monitor

Information used to monitor the server is stored under cn=monitor. This entry and its children are read-only; clients cannot directly modify them. The server updates this information automatically. This section describes the cn=monitor attributes. The only attribute that can be changed by a user to set access control is the aci attribute.

92 Core server configuration reference