HP UX Identity Security Software manual Nsslapd-auditlog-logrotationtime Audit log rotation time

2.3.1.28 nsslapd-auditlog-logrotationsyncmin (Audit log rotation sync minute)

This attribute sets the minute of the day for rotating audit logs. This attribute must be used in conjunction with nsslapd-auditlog-logrotationsync-enabled and nsslapd-auditlog-logrotationsynchour attributes.

Parameter	Description
Entry DN	cn=config
Valid Range	0 through 59
Default Value	None (because nsslapd-auditlog-logrotationsync-enabled is off)
Syntax	Integer
Example	nsslapd-auditlog-logrotationsyncmin: 30

2.3.1.29 nsslapd-auditlog-logrotationtime (Audit log rotation time)

This attribute sets the time between audit log file rotations. The audit log is rotated when this time interval is up, regardless of the current size of the audit log. This attribute supplies only the number of units. The units (day, week, month, and so forth) are given by the nsslapd-auditlog-logrotationtimeunit attribute. If the nsslapd-auditlog-maxlogsperdir attribute is set to 1, the server ignores this attribute.

Although it is not recommended for performance reasons to specify no log rotation, as the log grows indefinitely, there are two ways of specifying this. Either set the nsslapd-auditlog-maxlogsperdir attribute value to 1 or set the nsslapd-auditlog-logrotationtime attribute to -1. The server checks the nsslapd-auditlog-maxlogsperdir attribute first, and, if this attribute value is larger than 1, the server then checks the nsslapd-auditlog-logrotationtime attribute. See “nsslapd-auditlog-maxlogsperdir (Audit log maximum number of log files)” for more information.

Parameter	Description
Entry DN	cn=config
Valid Range	-1 1 to the maximum 32-bit integer value (2147483647), where a value of -1 means that the
	time between audit log file rotation is unlimited.
Default Value	1
Syntax	Integer
Example	nsslapd-auditlog-logrotationtime: 100

2.3.1.30 nsslapd-auditlog-logrotationtimeunit (Audit log rotation time unit)

This attribute sets the units for the nsslapd-auditlog-logrotationtimeattribute.

Parameter	Description
Entry DN	cn=config
Valid Values	month week day hour minute
Default Value	week
Syntax	DirectoryString
Example	nsslapd-auditlog-logrotationtimeunit: day

34 Core server configuration reference