Moxa Technologies EDS-508 Management Vlan Setting, Port Pvid, Port Fixed Vlan List Tagged

EDS-508 Series User’s Manual Featured Functions

Port Type

Setting	Description	Factory Default
Access	This port type is used to connect single devices
	without tag.
	Select ”Trunk” port type to connect another 802.1Q	Access
Trunk	VLAN aware switch or another LAN that combines
	tagged and/or untagged devices and/or other
	switches/hubs.

For communication redundancy in the VLAN environment, set “Redundant Port,” “Coupling Port,” and “Coupling Control Port” as “Trunk Port,” since these ports act as the “backbone” to transmit all packets of different VLANs to different EDSs.

Management VLAN Setting

	Setting	Description		Factory Default
	VID range	Set the management VLAN of this EDS-508.	1
	from 1 to 4094
Port PVID
	Setting	Description		Factory Default
	VID range	Set the port default VLAN ID for untagged devices	1
	from 1 to 4094	that connect to the port.
Port Fixed VLAN List (Tagged)
	Setting	Description		Factory Default
		This field will be active only when selecting the
	VID range	“Trunk” port type. Set the other VLAN ID for tagged		None
	from 1 to 4094	devices that connect to the “Trunk” port. Use commas
		to separate different VIDs.
Port Forbidden VLAN List
	Setting	Description		Factory Default
		This field will be active only when selecting the
	VID range	“Trunk” port type. Set the VLAN IDs that will not be		None
	from 1 to 4094	supported by this trunk port. Use commas to separate
		different VIDs.

3-39