Moxa Technologies EDS-508 Accessible IP, Password Setting, # Any host can access the NE-4000T

EDS-508 Series User’s ManualFeatured Functions

Password Setting

Setting	Descriptions	Factory Default
Old Password (Max.	Type current password when changing	None
16 Characters)	the password
New Password (Max.	Type new password when changing the	None
16 Characters)	password
Retype Password	If you type a new password in the
(Max. 16 Characters)	Password field, you will be required to
	retype the password in the Retype new	None
	password field before updating the new
	password.

Accessible IP

Moxa EtherDevice Switches use an IP address-based filtering method to control access to the EDS.

Accessible IP Settings allows you to add or remove “Legal” remote host IP addresses to prevent unauthorized access. Access to EtherDevice Switch is controlled by IP address. That is, if a host’s IP address is in the accessible IP table, then the host will be allowed access to the EtherDevice Switch. You can allow one of the following cases by setting this parameter

#Only one host of specific IP address can access the NE-4000T

Enter “IP address/255.255.255.255” (e.g., “192.168.1.1/255.255.255.255”)

#Hosts on the specific subnet can access the NE-4000T

Enter “IP address/255.255.255.0” (e.g., “192.168.1.0/255.255.255.0”)

#Any host can access the NE-4000T

Disable this function. Refer to the following table for more configuration examples.

Allowable Hosts		Input format
Any host		Disable
192.168.1.120		192.168.1.120 / 255.255.255.255
192.168.1.1 to 192.168.1.254		192.168.1.0 / 255.255.255.0
192.168.0.1 to 192.168.255.254		192.168.0.0 / 255.255.0.0
192.168.1.1 to 192.168.1.126		192.168.1.0 / 255.255.255.128
192.168.1.129 to 192.168.1.254		192.168.1.128 / 255.255.255.128
	3-4