Relay Alarm Events Settings | Moxa Technologies EDS-508 specification

EDS-508 Series User’s Manual

Featured Functions

2.Activate your settings

After configuring and activating your MOXA EtherDevice Switch’s Relay Event Types.

Relay Alarm Events Settings

Event Types

Event Types can be divided into two basic groups: System Events and Port Events. System Events are related to the overall function of the Switch, whereas Port Events are related to the activity of a specific port.

MOXA EtherDevice Switch supports two relay outputs. You can configure which relay output is related to which events. This helps administrators identify the importance of the different events.

System Event	Warning Relay output is triggered when…
Power Transition (On"Off)	EDS is powered up.
Power Transition (Off"On)	EDS is powered down.
DI1 (On"Off)	Digital Input 1 is triggered by on to off transition
DI1 (Off"On)	Digital Input 1 is triggered by off to on transition
DI2 (On"Off)	Digital Input 2 is triggered by on to off transition

DI2 (Off"On)	Digital Input 2 is triggered by off to on transition

	Port Event	Warning e-mail is sent when…

	Link-on	The port is connected to another device.

	Link-off	The port is disconnected (e.g., the cable is pulled
	Link-off	out, or the opposing device shuts down).
		out, or the opposing device shuts down).
	Traffic-Overload	The port’s traffic surpasses the Traffic-Threshold for
	Traffic-Overload	that port (provided this item is Enabled).
		that port (provided this item is Enabled).
	Traffic-Threshold (%)	Enter a nonzero number if the port’s
	Traffic-Threshold (%)	Traffic-Overload item is Enabled.
		Traffic-Overload item is Enabled.
		A Traffic-Overload warning is sent every
	Traffic-Duration (sec.)	Traffic-Durationseconds if the average
	Traffic-Duration (sec.)	Traffic-Threshold is surpassed during that time
		Traffic-Threshold is surpassed during that time
		period.

		3-51

Image 67

Moxa Technologies EDS-508 user manual Relay Alarm Events Settings, Activate your settings

Contents

Second Edition, November Moxa EtherDevice Switch User’s Manual EDS-508 Series Disclaimer Moxa EtherDevice Switch EDS User’s ManualCopyright Notice Trademarks Table of Contents Chapter EDS Configurator GUI Introduction Industrial vs. Commercial Moxa EtherDevice SwitchPackage Checklist Inside the Future of Industrial Ethernet Technology Designed for Industrial Applications FeaturesUseful Utility and Remote Configuration Advanced Industrial Networking CapabilityPage Getting Started Connection Caution Using the RS-232 Serial Console 115200, None, 8, 1, VT100 EDS-508 Series User’s Manual Getting Started Key Function Using the Telnet Console EDS-508 Series User’s Manual Getting Started Using Web Configuration For details Page Featured Functions Switch Description Setting Descriptions Factory Default Configuring Basic SettingsSwitch Name Setting Descriptions Factory Default Switch Location Setting Descriptions Factory Default Account Name PasswordDisable Telnet/Web Console Setting Descriptions Factory Default # Any host can access the NE-4000T Accessible IPPassword Setting # Hosts on the specific subnet can access the NE-4000T Port Enable/Disable PortName Port Type Port Transmission SpeedFDX Flow Control Default Gateway Auto IP ConfigurationSwitch IP Address Switch Subnet Mask Time Current Time Setting Description Factory DefaultDNS IP Address Time Zone Setting Description Factory Default Current Date Setting Description Factory DefaultSystem Up Time Tftp Server IP/Name Setting Description Factory Default System File Update-By Remote TftpLog file path and name Setting Description Factory Default Log File Export System File Update-By Local Import/ExportConfiguration File Export Configuration File Import Factory Default Using Port TrunkingConcept of Port Trunking Port Trunking Settings Configuring Port TrunkingTrunking settings Port setting information Using SnmpEnable/Disable V1, V2c Read/Write Community Configuring Snmp Snmp Read/Write SettingsSnmp Versions V1, V2c Read Community User Data Encryption Key For Snmp V1, V2c, V3 and V3 only Admin Auth. Type For Snmp V1, V2c, V3 and V3 onlyAdmin Data Encryption Key For Snmp V1, V2c, V3 and V3 only User Auth. Type For Snmp V1, V2c, V3 and V3 only Concept of Turbo Ring Using Communication RedundancyTrap Settings Private MIB information When the number of EDS units in the Turbo Ring is even Page Switch a Coupler Configuring Turbo Ring Concept of STP/RSTP What is STP? STP Requirements How STP Works Port Speed Path Cost 802.1D Edition 802.1w-2001 STP ConfigurationSTP Reconfiguration How Rstp Differs from STP STP Example Using STP on a Network with Multiple VLANs Configuring STP/RSTP Hello time sec Root/Not RootProtocol of Redundancy Bridge priority Port Priority Enable STP per PortConfiguration Limits of RSTP/STP Max. Age sec How Traffic Prioritization Works Using Traffic PrioritizationWhat is Traffic Prioritization? Concept of Traffic Prioritization Ieee 802.1p Priority Level Ieee 802.1D Traffic Type Differentiated Services DiffServ Traffic MarkingTraffic Prioritization QoS Classification Configuring Traffic PrioritizationTraffic Queues Inspect COS Default Port PriorityQueuing Mechanism Inspect TOS TOS/DiffServ Mapping CoS Mapping Benefits of VLANs Using Virtual LANWhat is a VLAN? Concept of Virtual LAN Vlan VLANs Tagged and Untagged Membership VLANs and Moxa EtherDevice SwitchManagement Vlan Communication Between VLANs Device a Switch a Switch B Sample Applications of VLANs using Moxa EtherDevice Switch Vlan Port Settings Configuring 802.1Q Vlan Port Forbidden Vlan List Management Vlan SettingPort Pvid Port Fixed Vlan List Tagged Vlan Table Using Multicast FilteringWhat is an IP Multicast? Concept of Multicast Filtering Network without multicast filtering Multicast Filtering Enabling Igmp Snooping Configuring Multicast FilteringMulticast Filtering and Moxa EtherDevice Switch Igmp Multicast Filtering Static Multicast Router Port Igmp Snooping Settings Querier intervalIgmp Snooping Enable Global Igmp Snooping Enable per Vlan Add New Static Multicast Address to the List Using Rate LimitingAdd Static Multicast MAC Igmp Table Rate of Normal Priority Queue Configuring Rate LimitingIngress Policy Rate of Low Priority Queue Rate of High Priority Queue Using Port LockAdding a Static Unicast MAC Address Rate of Medium Priority Queue Add Static Unicast MAC Address Using Auto WarningConfiguring Port Lock Configuring Email Warning Event Types Email Alarm Events SettingsConfiguring Email Settings Activate your settings and test email if necessary MoxaEtherDeviceSwitch0001@SwitchLocation Email SettingsPort Event Email Address Configuring Relay WarningConfiguring Relay Event Types Mail Server IP/Name Activate your settings Relay Alarm Events Settings Relay Alarm List Using Line-Swap-Fast-RecoveryOverride relay alarm settings Configuring Line-Swap Fast Recovery Using Set Device IPEnable Line-Swap-Fast-Recovery Set up the connected devices Configuring Set Device IP Output data stream Using DiagnosisMirror Port Desired IP Address Monitor by Switch Using MonitorPing Monitor by Port ALL Using the MAC Address Table Using Event Log Page EDS Configurator GUI Broadcast Search Starting EDS Configurator Search by IP address Modify IP Address Upgrade Firmware Export Configuration Import Configuration Blank Unlock ServerLocked Unlocked Locked Fixed FixedUnlocked Fixed MIB Groups Page Optical Fiber SpecificationsTechnology Interface Regulatory Approvals PowerMechanical Environment Service Information Following services are provided Moxa Internet Services Moxa Product % EDS-508 Problem Report FormSerial Number Product Return Procedure