Eton G2 owner manual Contrast setting, Memory info, Date format, Key lock

G2 REPORTER OWNER’S MANUAL

contrast setting

Select [Contrast] in Sys Set mode and press the Tuning Knob.

The brightness level 0-16 appears on the display, rotate the Tuning Knob to adjust, and then press the Tuning Knob to confirm and exit.

memory info

Select [Memory Info] in Sys Set mode and press the Tuning Knob to display the memory status.

date format

Select [Date Format] in Sys Set mode and press the Tuning Knob, then rotate the Tuning Knob to select the belowing date format:

·yyyy mm dd

·mm dd yyyy

·dd mm yyyy

·Exit

Press the Tuning Knob to confirm selection or wait 5 seconds to automatically cancel and exit.

key lock

To activate the locking function, push the < > button (on the left side of the unit) according to the direction shown on the unit, and the key lock symbol appears on the display; push it to the opposite direction to deactivate.

NOTE: If the unit is locked, first check if there is the [ ] symbol shown on the display, deactivate it before any operation.

23