Anderson Manufacturing AV-9000 manual Tuning Parameters, 13-31

13.4 TUNING PARAMETERS

The Tuning parameters section is where adjustments to the proportional band, automatic reset (integral), and other parameters for proper operation of proportional controls and/or first output/second output etc. for on/off controls are made.

For illustration purposes, all available parameters have been listed. The parameters that will appear on the specific instrument will depend upon the parameters previously selected in CONTROLLERS section.

To enter TUNING PARAMETERS, from the Normal Display, press the key until TUNING PARAMETERS is seen in the lower display line. If PASSWORD appears in the lower display line, the correct “password” will need to be entered before access to TUNING PARAMETERS is allowed. If TUNING PARAMETERS is not displayed, then Tuning Parmeters has been disabled. Refer to Section 9, Enables and Passwords, for instructions to enable Tuning Parameters.

With TUNING PARAMETERS in the lower display line:

1. Press the key to display CONTROLLER NUMBER.

CONTROLLER NUMBER	Press the	to change, then	or
1	to desired controller number, then press the			.

Selections

1-4

Section 13 13-31 Edition 3

Rev G