Anderson Manufacturing AV-9000 manual Cx Integration Band Units, Cx Integration Shift Units, 13-35

8. Press the to advance to the next parameter, INTEGRATION BAND (only if proportional output).

Note: Units correspond to Units configured in Process Variables.

Cx INTEGRATION BAND

100 units

Selections

0 to 999999

(decimal position=0)

Press the to change, then or0 to 9.9999 (decimal position=4)

to desired number, then press the .

INTEGRATION BAND sets the range where integration of the error will occur, centered on the control setpoint.

9. Press the to advance to the next parameter, INTEGRATION SHIFT (only if proportional output).

Note: Units correspond to Units configured in Process Variables.

Cx INTEGRATION SHIFT

0 units

			Selections
Press the	to change, then	or	0 to 999999
			(decimal position=0)
			0 to 9.9999
to desired number, then press the			(decimal position=4)
			.

INTEGRATION SHIFT represents a shift or offset for the integration band from its normal operating position, centered on the control setpoint.

Section 13 13-35 Edition 3

Rev G