Anderson Manufacturing AV-9000 manual U T S, Input Number, Entering Configuration

Section 4 - Configuration

Selections made in Configuration set up the recorder for operation. Not all sections are applicable for every recorder. Before or during configuration of your recorder, it is recommended that the Software Reference/Record Sheet (found at end of Section 3) be completely filled in.

4.1 ENTERING CONFIGURATION

From the Normal Display, press the until CONFIGURATION is seen in the lower display line. If PASS-

WORD appears in the lower display line, the correct “password” will need to be entered before access to CON-

FIGURATION is allowed. If CONFIGURATION is not displayed, then Configuration has been disabled. Refer to

Section 9, Enables and Passwords, for instructions to enable Configuration.

4.1.1 INPUTS

Input defines input types, ranges, units, scaling and display status for each of 1-8 inputs.

With CONFIGURATION in the lower display line, press the	then	until INPUTS appears in the lower
display line.

I

N P U T S

1. Press the to display INPUT NUMBER.

INPUT NUMBER

1

Press the to change, then or

to desired input number, then press the

to store into memory.

Selections

1 - 8

Section 4 4-1 Edition 3

Rev G