Anderson Manufacturing AV-9000 manual Keypad Test, LED Test, 10-3, ESC key will exit this test

10.3 KEYPAD TEST

Allows the operator to verify that the keypad is functional. No test equipment is required to perform this test.

Step 1
With KEYPAD in the lower display line, depress the	and INITIATE KEYPAD TEST appears in the upper
display line and NO appears in the lower display line. Depress		, select YES, then depress	to start
the test.

Step 2

THE KEY PRESSED WAS appears in the upper display line and ENTER KEY appears in the lower display line. With each depression of a key (EXCEPT ESC), the name of that key will appear in the lower display line. The

ESC key will exit this test.

Step 3

To exit this test, depress the key and the instrument will return to the normal display.

10.4 LED TEST

Allows the operator to verify that the LEDs are functional. No test equipment is required to perform this test.

Step 1

With LED in the lower display line, depress the and and NO appears in the lower display line. Depress the

INITIATE LED TEST appears in the upper display line

, select YES, then depress to start the test.

Step 2

LED TEST PROCEDURE will appear in the upper display line and PRESS ENTER TO START will appear in the

lower display line. Depress		, and PRESS ENTER TO INDEX appears in the lower display line.
Step 3
Depress	and LED 1 should light. With each successive depression of			, the LEDs turn ON,
then OFF in order, 1 through 8, then all ON, then all OFF. If			is depressed again, the sequence begins
again.
Step 4
To exit the test, depress the		and the instrument will return to the normal display.

Section 10 10-3 Edition 3

Rev G