Anderson Manufacturing AV-9000 manual Linear, Factory REF+LIN Deviation Resol Ranges Accy CAL +CAL

	See Note:	1	3	4	5	6
LINEAR	SPAN	REF	FACTORY	REF+LIN	DEVIATION	RESOL
RANGES		ACC'Y	CAL	+CAL	ACC'Y
	mV	uV	uV	uV	uV/°C	uV/bit
10V	0/10000	2500	1000	3500	1000	381
1V	0/1000	250	100	350	100.0	38.1
100mV	0/100	25	20	45	10.0	3.81
25mV	0/25	6	20	26	2.5	0.954
	See Note:	1	3	4	5	6
LINEAR	SPAN	REF.	FACTORY	REF+CAL	DEVIATION	RESOL.
RANGES		ACC'Y	CAL		ACC'Y
	mA	uA	uA	uA	uA/°C	uA/bit
mA	4/20	5	2	7	2.0	0.763
	0/20	5	2	7	2.0	0.763

NOTES: The Table attempts to show the effect of each significant factor which contributes to the overall measure- ment error. See the enumerated items below for more specific explainations of each column of data.

1.Reference Acc'y based on 0.025% (250ppm) of input voltage span.

2.Linearization Acc'y is based on conformance to NIST Monograph 175 (based on the ITS-90) for letter-designated thermocouple types, or other industry standards for non letter-designated type T/Cs and all RTDs.

3.Factory Cal is defined by limits of repeatability in a manufacturing environment of ±10uV for zero and span calibrations on thermocouples, as stated or other inputs, and ±0.15°C for thermocouple cold junction calibrations.

4.The REF + LIN + CAL column represents the total "static" error allowed for an instrument as produced by the manufacturing process.

5.Deviation Acc'y is derived from a temperature coefficient of .01%/°C or ±100ppm/°C expressed in units of the corresponding range.

6.Resolution on thermocouples and RTDs is derived as a function of the input voltage Range and dV/dT.

Appendix E E-3 Edition 3

Rev G