Listening to the radio
Tuning
1 Press the
2 Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM).
3 Press the TUNING/TIME (
or 
) button to tune in to the desired station.
Manual tuning:
Press the TUNING/TIME button as many times as required to tune in to the de- sired station.
Auto tuning:
When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast sta- tion.
Notes:
When radio interference occurs, auto scan tuning may stop automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING/TIME button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator. "
" will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator
If the FM reception is weak, press the TUNER (BAND) button to extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer.
After use:
Press the
Sound control (See page 14.)
Radio - Listening to the radio -
19
02/1/8
