Listening to the radio (continued)
Memorising a station | To recall a memorised station |
Radio - Listening to the radio -
You can store 40 AM and FM stations in memory and recall them at the push of a but- ton. (Preset tuning)
1 Perform steps 1 - 3 in "Tuning" on page 19.
2 Press the MEMORY/SET button to enter the preset tuning saving mode.
3 Within 30 seconds, press the PRESET (
or 
) button to select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4 Within 30 seconds, press the MEMORY/SET button to store that station in memory.
If the "MEMORY" and preset number indicators go out before the station is mem- orised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a preset sta- tion.
When a new station is stored in memory, the station previously memorised will be erased.
Note:
The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead disconnection.
Press the PRESET (
or 
) button for less than 0.5 seconds to select the desired station.
Preset channel | Frequency and frequency band |
This can be operated by pressing the TUNER PRESET (
or 
) button on the re- mote control.
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1 Press the PRESET (
or 
) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in se-
quentially, for 5 seconds each.
This can be operated by pressing the TUNER PRESET (
or 
) button on the
remote control.
2 Press the PRESET (
or 
) button again when the desired station is located.
To erase entire preset memory
1Press the
2Whilst pressing down the TUNER (BAND) button and the
20
Tuning (See page 19.)
02/1/8
