References | Maintenance / Specifications - |
| - |
|
|
30
Maintenance
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller
cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which contains high voltages.
TAPE 1 | A | B | C |
| |||
|
|
| |
D | E B | C | |
|
|
| |
TAPE 2 |
|
|
|
Playback head | Erase head |
Capstan | Recording/Playback head |
Pinch roller |
|
After long use, the deck's heads and capstans may become magnetised, causing poor sound. Demagnetise these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetiser. Read the demagnetiser's instructions carefully before use.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunctions.
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
General
Power source | AC |
|
|
Power consumption | 116 W |
|
|
Dimensions | Width: 270 mm |
| Height: 330 mm (13") |
| Depth: 355 mm |
|
|
Weight | 7.2 kg (15.9 lbs.) |
|
|
Amplifier |
|
|
|
Output power | Front speakers: |
| RMS: 80 W (40 W + 40 W) (10 % T.H.D.) |
| RMS: 64 W (32 W + 32 W) (0.9 % T.H.D.) |
| Centre speaker: |
| RMS: 20 W (10 % T.H.D.) |
| RMS: 16 W (0.9 % T.H.D.) |
| Surround speakers: |
| RMS: 20 W (10 W + 10 W) (10 % T.H.D.) |
| RMS: 16 W (8 W + 8 W) (0.9 % T.H.D.) |
|
|
Output terminals | Front speakers: 6 ohms |
| Centre speaker: 6 ohms |
| Surround speakers: 12 ohms |
| Headphones: 16 - 50 ohms (recommended: 32 ohms) |
|
|
Input terminals | Video/Auxiliary (audio signal): 500 mV/47 kohms |
|
|
