To adjust the speaker volume:
1 When in the normal or phantom mode, press the TEST TONE but- ton.
The test tone will be heard from each speaker, in order, at about
In normal mode:
Left (L ch) Centre (C ch) Right (R ch) Surround (S ch)
In phantom mode:
Left (L ch) |
| Right (R ch) |
| Surround (S ch) | ||
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 Adjust the speaker volume level whilst the test tone is being out- put from the centre or surround speakers.
To set the centre speaker volume to the level of the front speakers:
When in the normal mode, press the CENTER LEVEL button to increase the volume and the CENTER LEVEL button to decrease it.
|
| ... +9 |
|
| +10 |
|
| |||||||
|
|
|
|
| ||||||||||
|
|
|
|
| ||||||||||
To set the surround speaker volume to the level of the front speak- |
|
| ||||||||||||
ers: |
|
|
|
|
|
|
|
|
|
|
| FeaturesAdvanced | ||
When in the normal or phantom mode, press the SURROUND LEVEL button | ||||||||||||||
|
| |||||||||||||
toincrease the volume and the SURROUND LEVEL | button to decrease it. |
|
| |||||||||||
|
|
| ... +9 |
|
| +10 |
|
| ||||||
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
| ||||||||
You can change the volume level within the range of +10dB to |
|
| ||||||||||||
steps. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |||||
3 After adjusting the speaker volume level, press the TEST TONE |
|
| ||||||||||||
button. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The test tone will stop. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
To balance the front speakers: |
|
|
|
|
|
|
|
|
|
| ||||
Press the BALANCE button to decrease the right speaker level (the left speaker |
|
| ||||||||||||
level will increase), and press the BALANCE |
| button to decrease the left speaker |
|
| ||||||||||
level (the right speaker level will increase). |
|
|
|
|
|
|
|
|
|
| ||||
1 |
| 15 |
|
|
| 1 |
|
| 15 |
|
| |||
|
|
|
|
|
|
|
Notes:
Be sure to adjust the sound at your favorite listening position.
The volume settings for the centre and surround speakers are stored in memory for future use. However, after a power failure or leaving the unit unplugged for over one day, they will return to initial settings.
25
02/1/8