Sharp CD-DP900E System connections, Aerial connection, Removing the transport screw, FM aerial

CD-DP900E		System connections
		AM loop aerial			￿ Aerial connection
					Supplied FM aerial:
			FM aerial
					Connect the FM aerial wire to the FM 75
					OHMS socket and position the FM aerial wire
			Transport screw		in the direction where the strongest signal can
					be received.
		Surround speaker	Centre speaker	Surround speaker	Supplied AM loop aerial:
		(Right)		(Left)	Connect the AM loop aerial to the AM LOOP
					socket. Position the AM loop aerial for opti-
					mum reception. Place the AM loop aerial on a
					shelf, etc., or attach it to a stand or a wall with
Use					screws (not supplied).
	-				Note:
					Placing the aerial on the stereo system or near the AC power lead may cause noise
forPreparation	connectionsSystem-				pickup. Place the aerial away from the stereo system for better reception.
					Installing the AM loop aerial:
					< Assembling >	< Attaching to the wall >
		Front speaker		Front speaker
		(Right)		(Left)		Wall	Screws (not supplied)
					External FM aerial:
					Use an external FM aerial if you require better reception. Consult your dealer.
							External FM aerial
				Wall socket
				(AC 230-240 V, 50 Hz)

￿ Removing the transport screw

Before turning the power on, be sure to remove the transport screw on the back of the unit using a flat head screwdriver or a coin.

Note:

This screw is required when transporting the unit again. Please keep it (see page 29).

10

02/1/11 CD-DP900E(UK)_1.fm