Intel D915GAG Setting the BIOS Configuration Jumper Block, Jumper Setting, Mode, Description

Intel Desktop Board D915GEV/D915GUX/D915GAV/D915GAG Product Guide

Setting the BIOS Configuration Jumper Block

CAUTION

Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation.

Figure 28 shows the location of the desktop board’s BIOS configuration jumper.

1 3

OM16898

Figure 28. Location of the BIOS Configuration Jumper Block

The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 12 shows the jumper settings for the Setup program modes.

Table 12. Jumper Settings for the BIOS Setup Program Modes

Jumper Setting		Mode	Description
1	3	Normal (default) (1-2)	The BIOS uses the current configuration and passwords for
			booting.
1	3	Configure (2-3)	After the Power-On Self-Test (POST) runs, the BIOS
			displays the Maintenance Menu. Use this menu to clear
			passwords.
1	3	Recovery (None)	The BIOS recovers data from a recovery diskette in the
			event of a failed BIOS update.

52