Intel D915GAV, D915GAG, D915GUX, D915GEV manual Connecting the Serial ATA SATA Cable

Installing and Replacing Desktop Board Components

Connecting the Serial ATA (SATA) Cable

The SATA cable (4-conductor) supports the Serial ATA protocol and connects a single drive to the desktop board. Either end of the cable can be connected to the SATA drive or the connector on the board.

For correct cable function:

1.Observe the precaution in "Before You Begin" on page 27.

2.Attach either cable end to the connector (Figure 21, A) on the board.

3.Attach the other cable end to the drive (Figure 21, B).

A

B

OM16897

Figure 21. Connecting the Serial ATA Cable

43