Desktop Board Features
Main Memory
NOTE
To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.
The desktop board supports dual or single channel memory configurations.
Desktop boards D915GAV and D915GAG support dual or single channel memory configurations defined in Table 5.
Table 5. Desktop Board D915GAV/D915GAG Memory Configurations
Memory Speed | Processor | FSB frequency (MHz) | Memory Speed Outcome (MHz) |
|
|
|
|
DDR 400 | Pentium 4 processor | 800 | 400 |
|
|
|
|
|
| 533 | 400 |
|
|
|
|
DDR 333 | Pentium 4 processor | 800 | 333 |
|
|
|
|
|
| 533 | 333 |
|
|
|
|
Desktop boards D915GAV and D915GAG support:
•Four
•Unbuffered,
•Serial Presence Detect (SPD) memory only
•
•2.5 V memory
•Memory configuration listed below:
⎯Up to 1.0 GB utilizing 128 Mb technology
⎯Up to 2.0 GB utilizing 256 Mb technology
⎯Up to 4.0 GB utilizing 512 Mb or 1 GB technology
17