G2 REPORTER OWNER’S MANUAL
Alarm Set
1.Select [Alarm Set] in Sys Set mode and press the Tuning Knob, [New] appears on the display.
2.Press the Tuning Knob again to enter the alarm setting, [Normal Alarm/Power On/Power Off/Exit] appears.
3.Rotate the Tuning Knob to select Normal Alarm and press the Tuning Knob.
4.Rotate the Tuning Knob to select either [Only Once/Daily], press the Tuning Knob to enter [Alarm Time Setting].
5.Rotate the Tuning Knob to adjust hours, minutes and seconds. Press the Tuning Knob to confirm. Now it shows [Yes/No] and [Do you want to add?] on the display.
6.Rotate the Tuning Knob to select [Yes], press the Tuning Knob to confirm and enter the below setting sections:
·Sleep Time:
·Play Time:
·Alarm Count:
·Alarm Music: Audio/Record alarm music selection
·Alarm Volume:
·Alarm Preview: Alarm with your preset music
·Exit: Exit the alarm setting
Press the < 
> button to turn off the alarm, and press any other buttons to pause the alarm, and it will play again in few minutes.
20
