
1PREPARING FOR USE
Operation display area
Whenever the power is turned on, the operation display area will be shown at the top of the monitor screen. This area indicates the date, time, picture quality, and other information needed for operation.
02
(1)(2) (3) (4) (5)(6) (7)
01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
02
(8)
(1)Date display (JP.17)
(2)Time display (JP.17)
“00:00:00” is displayed when you turn the power on for the first time. The digital video recorder uses the date and time to manage recording and playback points.
Accordingly, if the time has not been set correctly, you will not be able to effectively search for video data. Make sure to specify the time using menu settings. Recording will not be possible until a setting has been made.
(3)Operating symbol display
Displays the current operation (such as recording or playback).
REC: Recording |
|
|
|
|
| : | |||||
EXT: External timer recording |
|
|
|
|
| : | |||||
|
|
| : Playback |
|
|
|
|
| : Slow playback | ||
|
| ||||||||||
|
| ||||||||||
|
|
| : Reverse playback |
|
|
|
|
| : Reverse slow playback | ||
|
|
|
|
| |||||||
|
|
| : Still |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
zDuring simultaneous recording and playback, the display indicates playback ( ).
(4)Remaining memory in recording area (JP.67) Displays the remaining area memory as a percentage when overwriting in the normal recording area or the alarm recording area is forbidden. If overwriting has been permitted, “REPEAT” is displayed.
(5)Picture quality display (JP.71)
Displays the quality of the video that can be recorded on the hard disk. Set to “EN” (Enhanced) by default.
BA | Basic |
NO | Normal |
EN | Enhanced |
FI | Fine |
SF | Super Fine |
(6)Audio recording display
“A” is displayed when audio is being recorded or played back.
(7)Alarm display and alarm count display (JP.77) When you set an alarm using the “ALARM REC MODE SET” menu item, the alarm display area presents the following information.
z When alarm recording is set; “ALARM” is displayed.
“ALARM” is flashed during alarm recording. z When
“PRE” is displayed.
When an alarm occurs, “PRE” disappears, “ALARM” is displayed, and the number of alarms is shown. The total number is indicated in the alarm display.
z When performing playback from the archive area;
“ARCHIV” is displayed.
z When an external alarm signal is activated; “EA” is flashed to the left of the camera number.
z When a motion sensor alarm signal is activated;
“SA” is flashed to the left of the camera number. z When an external alarm signal and motion
sensor signal are activated;
“ES” flashes to the left of the camera number.
(8)Camera title display
The camera number or camera title is displayed. In addition, when an alarm occurs, the camera number and alarm “EA”, “SA” or “ES” are displayed along with the camera title.
z During video loss;
The display alternates between showing the camera title and “VIDEO LOSS”. “VIDEO LOSS” flashes when the operating display is hidden. (JP.16)
z During no video signal;
“NO VIDEO” is displayed in place of the camera title.
zAlthough operations such as playback, copying, and data transfer are possible while recording, this unit gives priority to recording, and other operations may be delayed as a result.
English | 15 |