5SEARCHING FOR RECORDED VIDEO
Archive area search
Use the following procedure to playback video that has been stored in the archive area.
1 Press the [SEARCH] button while the digital video recorder is recording or stopped.
The SEARCH indicator lightsup and the <SEARCH> screen is displayed.
SEARCH
2 Turn the jog dial to select “ARCHIVE AREA SEARCH”.
<SEARCH> |
|
ALARM SEARCH | |
ALARM THUMBNAIL SEARCH | |
TIME/DATE SEARCH | |
|
|
ARCHIVE AREA SEARCH | |
MOTION DETECTION SEARCH |
MOVE:JOG SELECT:SHUTTLE
3 Turn the shuttle dial clockwise.
The <ARCHIVE AREA SEARCH> screen is displayed. This screen lists the eight
(1) | (2) | (3) (4) |
|
|
|
| |
|
| <ARCHIVE AREA SEARCH> |
|
| |||
NO | DATE | START | CH | CAPACITY | (5) | ||
0001 | 01:48 | 1 | TOTAL | - | 816MB | ||
0002 | 09:53 | 1 | USED | - | 16MB | (6) | |
0003 | 02:41 | 1 |
|
|
|
| |
0004 | 03:10 | 1 |
|
|
|
| |
0005 | 04:25 | 1 |
|
|
|
| |
0006 | 02:40 | 1 |
|
|
|
| |
0007 | 01:25 | 1 |
|
|
|
| |
0008 | 01:25 | 1 |
|
|
|
| |
| MOVE:JOG | SELECT:SHUTTLE |
|
| |||
(1)NO: Indicates the archive number.
(2)DATE: Indicates the date of recording.
(3)START: Indicates the start time for the recording.
(4)CH: Indicates the channel (or camera number) for the recording.
(5)TOTAL: Indicates the total capacity of the archive area.
(6)USED: Indicates the amount of the archive area that has been used.
4 Turn the jog dial to select the video for playback.
The selected image is displayed on the preview screen.
zTo display the next or previous recording Turn the jog dial clockwise or
zUp to eight recordings can be displayed in the <ARCHIVE AREA SEARCH> screen.
zTo leave search mode
Press the [SEARCH] button. SEARCH indicator turns off.
5 Turn the shuttle dial clockwise.
The selected recording is played back on the full screen.
Motion detection search
By setting the motion sensor for recordings from the normal recording area (i.e., normal recordings and timer recordings) or alarm recording area, variations from these recordings as a result of the presence of an intruder or the like can be detected, and the corresponding video can be played back.
zWhen a camera number (or channel) is specified, searching will only be carried out for that camera.
1 Press the [SEARCH] button while the digital video recorder is recording or stopped.
SEARCH indicator lights up and the <SEARCH> screen is displayed.
SEARCH
OPERATION
34 | English |
