![](/images/new-backgrounds/1305456/305456227x1.webp)
2SPECIFICATIONS
Specifications
Product name | Digital video recorder with multiplexer function | ||
Product number | |||
Hard disk capacity | Capability for mounting 80, 160, 250, or 300 GB hard disks (sold separately) | ||
Television system | NTSC signal standard | ||
|
| ||
Compression | Image: | ||
|
| ||
Picture resolution | 720 x 240 (fields) | ||
Recording type | Field recording | ||
|
| ||
Picture quality | 5 levels [Basic, Normal, Enhanced, Fine, Super Fine] | ||
Recording rate | 27 levels (60 to 0.033 FPS) | ||
|
| ||
Recording areas | Normal recording area, Alarm recording area, Archive area | ||
|
| ||
Magnification | x2 digital zoom using the [ZOOM] button | ||
Search modes | Time/date search, Alarm search, Alarm thumbnail search, Archive area search, Motion detection search | ||
|
| ||
Date/clock settings | Month, Day, Year (last two digits), Hours, Minutes, Seconds | ||
Date and time positions | 2 position; upper and lower (display may also be turned off) | ||
|
| ||
Camera title display | Each channel; up to 10 alphanumeric characters and symbols (display may also be turned off) | ||
|
| ||
Memory backup | Approximately 30 days (for 48 hours of electrification) | ||
Video input terminal | VBS/VS 1.0 V | ||
|
| ||
Video output terminal | Through output of each video input, BNC | ||
Main monitor output terminal | VBS 1.0 V | ||
|
| ||
Monitor 2 output terminal | VBS/VS 1.0 V | ||
|
| ||
Audio input terminal | |||
Audio output terminal | |||
|
| ||
Microphone input terminal | |||
Front AV | Video output terminal | 1.0 | |
output | Audio output terminal | ||
|
|
| |
CompactFlash | card slot | CompactFlash Type 2 (front panel) (x1) | |
| LAN terminal | ||
| Compatible protocol: UDP, TCP/IP, HTTP server | ||
|
| ||
| |||
|
|
| |
| USB terminal | USB 1.1 series A terminal (x2) (front x1, rear x1) | |
|
|
| |
| Alarm input terminals | ||
| Sensor alarm output terminals | Open collector, Low level active (Max. 25 mA) | |
|
|
| |
| Remote control input terminal | ||
|
|
| |
| Clock adjust input terminal | ||
|
|
| |
| Clock adjust output terminal | Normal 5 V DC, Low level active (x1) | |
|
|
| |
Terminals | Alarm output terminal | Active Low, Open collector Max. 500 mA (x1) | |
Alarm reset input terminal | |||
| |||
|
|
| |
| Warning output terminal | Normal 5 V DC, Low level active (x1) | |
|
|
| |
| Normal recording area disk | Normal 5 V DC, Low level active (x1) | |
| full warning output terminal | ||
|
| ||
|
|
| |
| Alarm recording area disk full | Normal 5 V DC, Low level active (x1) | |
| warning output terminal |
| |
| Series connection input | Normal 5 V DC, Low level active (x1) | |
|
|
| |
| Series connection output | Normal 5 V DC, Low level active (x1) | |
| External timer input terminal | ||
|
|
| |
| Non rec output terminal | Normal 5 V DC, Low level active (x1) | |
Power supply voltage | 120 to 240 V AC, 50/60 Hz | ||
|
| ||
Current consumption | 600 mA | ||
|
| ||
Allowable operating temperature | 5 °C to 40 °C | ||
Allowable operating humidity | 10 % to 80 % | ||
|
|
| |
Dimensions |
| 420 (W) x 86 (H) x 365 (D) mm (Not including protruding areas or rubber pads) | |
Weight |
| 6.3 kg with a HDD, 6.9 kg with 2 HDDs | |
|
|
| |
Accessory |
| Power cord (x1), Core clamp (x2), Power cord tie (x1) | |
|
|
|
Note that product appearance and specifications are subject to change without prior notice.
English | 113 |