Manuals / Sanyo / TV and Video / DVR

Sanyo DSR-3709 Displaying the recording areas, Recording Area SET screen is displayed, Alarm

Models: DSR-3716 DSR-3709

1 126

Download 126 pages 9.24 Kb

Page 65

3RECORD SET

10 Set “AUDIO RECORDING”.

See P.62.

11 Turn the shuttle dial counter-clockwise.

The <WARNING> screen is displayed.

<WARNING>

REC RATE SETTING IN THE MENU WILL BE

AUTOMATICALLY ADJUSTED.

ARE YOU SURE ?

NO

CHANGE:JOG SET:SHUTTLE

12 Turn the jog dial to select “YES”, and then turn the shuttle dial clockwise.

The display returns to the <NORMAL REC EASY SET> screen.

13 Press the [EXIT/OSD] button.

The setting procedure is ended and the display returns to the normal screen.

EXIT/OSD

zThe recording rate is automatically calculated based on recording settings and the number of connected cameras, and this is indicated by “RECORDING DURATION”. If a valid figure cannot be calculated, “ERROR!” will be displayed.

zWhen simple recording settings and individual settings are both set, the most recent settings override previous settings.

zEasy setup settings cannot be used with program recording or day-specific timer recording.

Displaying the recording areas

Use the following procedures to confirm the hard disk’s total recording capacity and also the allocation for each recording area.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

2 Turn the jog dial to select “2.RECORD SET”, and then turn the shuttle dial clockwise.

The <RECORD SET> screen is displayed.

3 Turn the jog dial to select “2. RECORDING AREA SET”, and then turn the shuttle dial clockwise.

The <RECORDING AREA SET> screen is displayed.

	<RECORDING AREA SET>				(1)
	TOTAL CAPACITY		:	82GB	(1)
	NORMAL RECORDING AREA		:	80 %	(2)
	AREA FULL RESET	->			(3)
	ALARM RECORDING AREA		:	19 %	(3)
	AREA FULL RESET	->			(4)
	ARCHIVE AREA		:	1 %	(4)
	AREA FULL RESET	->
	CAUTION : WHEN THE AREA SETTING IS CHANGED,
	THE WHOLE AREA WILL BE INITIALIZED !
(1)	Displays the total capacity
	of the hard disk.
(2)	Sets the capacity of the				Normal
(2)	Sets the capacity of the				recording
	normal recording area.				area
					area
	Sets the capacity of the				Alarm
(3)	Sets the capacity of the				recording
	alarm recording area.				area
					area

(4)	Sets the capacity of the	Archive area
	archive area.

SETTINGS

64

English

Image 65

Sanyo DSR-3709, DSR-3716 instruction manual Displaying the recording areas, Recording Area SET screen is displayed, Alarm

Contents

Page Service PrecautionAccessories Main featuresSymbols used in this manual IntroductionContents Other Contents Settings„ Handling a detached HDD unit Before USE„ Notes on replacing the HDD Before USE Backup batteryHard disk and cooling fan are consumable components Important recordingsFront panel Names and Functions of PartsDSR-3716 DSR-3709 Names and Functions of PartsAlarm buttons JP.31 Timer button and indicator JP.23Menu Reset button JP.48 Jog dial inside and shuttle dial outside z During playbackRear panel Connecting RS-485 terminals Installation and ConnectionsBasic connections Pin locationsRS-485 termination switch settings Installation and ConnectionsConnection Cable typesConnecting an amplifier Connecting Sanyo protocol devices Dome CamerasConnecting Alarm in terminals Amp Sold separatelyConnecting the power cord Connecting Sensor Alarm OUT terminalsConnecting Control terminals Operation display area 01-01-04 000000 REC Repeat EN a AlarmPreparing for USE Changing the language Preparing for USEChanging the position of the operation display area Example Setting 830 on October 26 Setting the timeInternal hard disk Alarm recording areaHard disk recording areas Normal recording areaViewing on a full screen Viewing Video from a CameraViewing on quad screens Press the No Camera Select buttonViewing on plus screen Viewing Video from a CameraViewing on multi screens 9 screens/ 16 screens Viewing on the monitor Viewing with automatic screen selectionPress the Sequence button Press the Sequence button once againDisplaying alarm video in full screen format Set MON.2 Display from Alarm Operation SET to ON. JP.84Ending the monitor 2 setting procedure Selecting Camera No for full screenPress the Timer button Timer recordingRecording Normal recordingSet alarm recording Alarm recordingEnd alarm recording When an alarm signal is detectedSet pre-alarm recording Pre-alarm recordingIf an alarm is detected Alarm Full indicatorPlaying video on a full screen PlaybackFast-forward and fast-rewind playback Press the PLAY/STOP buttonChanging the playback speed PlaybackEnlarging the playback video Move the zoom frame to the area to be magnifiedPress the Zoom button Viewing still imagesPress the Still button during playback Press the Still button once againPress the Quad button during playback Performing frame advance forward or reversePlaying video on multiple screens Searching from the Search screen Searching for Recorded VideoPress the appropriate Alarm button during playback Alarm searchSearching for Recorded Video Turn the jog dial to select the video for playbackTurn the jog dial and select Alarm Thumbnail Search Alarm thumbnail searchAlarm number for the selected recording will start to flash Time/date searchIf no recording exists for the specified time ViewMotion detection search Archive area searchTurn the jog dial to select Archive Area Search Selected image is displayed on the preview screenExample Example AlarmStart ENDSet the motion sensor to use for searching „ If not Found is displayed Carry out motion sensor setting againTurn the jog dial to select Preview Copying video to the hard disk’s archive area JP.39 Saving Copying Recorded VideoCopying video to a CompactFlash card or Microdrive JP.41 Copying video to a CD-R/RW JP.45Copying video to the hard disk’s archive area Saving Copying Recorded VideoPress the Copy button Example Copying a specified 10-second portion of videoTurn the jog dial to select Seconds „ To cancel a copy operationInsertion method Removal method Copying video to a CompactFlash card or MicrodriveInsert a CompactFlash card ‹PICTURES When this has been completed, Copy Finished ! is displayedViewing images copied to a CompactFlash card on a PC Printing images from CompactFlash cards quick printDcim Turn the jog dial to select the unit Copying video to CD-R/RWConnect a recordable CD-R/RW drive and insert a disk Formatting a CompactFlash card and CD-RW Viewing images copied to a CD-R/RW on a PCMoving from the Main Menu to a sub-menu or setting screen Menu Configuration and OperationsBasic menu operations Turn the jog dial to select a menuRestoring menu setting items to their default values Menu Configuration and OperationsMovement and confirmation in sub-menus and setting screens Entering numbers with the numeric keysMain menu Sub-menu configurationMulti Screen Sub menu Setting item Settings or display contentSequence SET Color Level JP.105Setting the daylight saving Initial settingsInitial SET is used to make the following setting Initial SETTurn the jog dial to change the settings Turn the jog dial to select Mode under Daylight SavingWhen USE is selected for Daylight Saving Initial SETTurn the jog dial and move the cursor to ADJUST. Time External clock settingCursor moves to the time To C Terminal To Clock SET in terminalDisplayed Detecting connected camerasExample Setting the title HALL-1F for Camera No Setting camera titlesTurn the jog dial to select H Repeat steps 5 and 6 to enter the remaining charactersTurn the shuttle dial clockwise after setting Setting holidaysExample Setting November 17 as a holiday Set the month and day for item NoSetting time periods Time Period a settings Set T-1 to 6 AM Time period settingsExample 1 Setting periods using Time Period a Cursor moves to Mask Time period operations settingsTime Period a flashes Normal recording easy setup Settings for recordingCamera Select buttons Timer button Jog dial Record SETCursor moves to Timer Recording DLY Setting based on recording daysRecord SET Record SET screen is displayedSet Audio Recording Set Picture QualityTurn the shuttle dial counter-clockwise Example onSetting based on recording rate Recording Area SET screen is displayed AlarmDisplaying the recording areas Changing recording areas „ Default hard disk settings„ Recording area allocations „ If the normal recording area is set to 0%Cursor moves to Area Full Reset Setting overwrite permissionTurn the shuttle dial counter- clockwise Hard disk is initializedSetting overwriting for the normal recording area Setting recording conditionsOFF 01-01-04 000000 REC 1%Display area Capacity Setting series recording Starting and stopping series recording Set depending on your recording needsSetting normal recording Setting auto deletingTurn the jog dial to select the storage period Turn the shuttle dial clockwise Press the EXIT/OSD buttonExample P-1 Set REC RateSet REC Program Group Cameras No through No are available for the DSR-3709 Setting program recordingSelects Program No through Program No Cursor moves to 0.5 from Select Individual Camera Rate FPSTimer setting items Timer settingsTimer SET screen is displayed Cursor moves to the SUN row „ To change a displayed setting itemSUN from the Week column flashes Start time flashes asTo cancel all set timer reservations Make settings in the Week and Start columnsTimer reservations spanning more than 24 hours All setting items are cleared Menu Reset buttonTo set alarm recording Setting alarm recordingTimer recording using an external timer Maximum number Alarm REC Mode SET screen is displayedAlarm recordings When alarm recording settings have been completed Set Alarm InterleaveTo set pre-alarm recording Set REC Rate and DurationREC Rate for PRE-ALARM Recording flashes When pre-alarm recording settings have been completedDefault setting 1 MIN Cursor moves to Alarm Trigger Cursor moves to recording rate and durationSetting the alarm trigger Setting the motion sensorsUse this procedure to set other sensor positions Flashes for the Mode Cursor moves to Mode„ To stop motion sensor recording To BSetting alarm display Setting alarm operation and displayOFF flashes in the Alarm Retrigger field Example AlarmCursor moves to Alarm Priority Canceling alarmsSwitch FirstSetting data display General settingsGeneral SET EXIT/OSD button Shuttle dialGeneral SET Setting display for video lossPerform the following if so required Display SET screen is displayedAlarm default setting OFF Setting the buzzerDisk Full default setting on Disk Error default setting on„ Operation after setting passwords Setting the security lockSetting the administrator password Example Setting 123456AB as a passwordFollowing this, turn the shuttle dial clockwise Use the same procedure to set 123456ABTurn the jog dial to select on Turn the jog dial to move the cursor to UserTurn the jog dial to move cursor to Turn the jog dial to move cursor to REC ControlInitialization of hard disk erases all contents Setting and initializing the hard diskInitializing the hard disk HDD SET screen is displayed Cursor moves to Disk InitializeMaking network connections Network settingsExpanding the hard disk capacity Making network settings Set Subnet Mask Set IP AddressSet Gateway Set PortWhen setting has been completed, press the EXIT/OSD button Setting RS-485Cursor moves to Alarm Info General SET screen appearsCursor moves to Address Setting camera controlCamera Control SET screen is displayed Protocol field flashesSanyo Coax ADD. column flashesSanyo RS485 BBV CoaxPress the FUNC. button When zoomingOperating dome cameras with the digital video recorder Finishing dome camera operationSetting multi screen positions Setting quad, multi 9 and 16 displayScreen SET Example Displaying Camera No in quad positionChecking modified screen positions 101Screen SET Setting the main monitor and monitor Setting the automatic selection period1S flashes Automatic selection is set to a period of 5 secondsStarts to flash for Time Period 103MAIN/MON.2 Monitor SET screen is displayed Mask SET screen is displayed Setting masksCursor moves to Mask SET Color Level SET screen is displayed Setting the color level105 106 Power LOSS/USED Time screen is displayed Power LOSS/USED Time107 Displays the total amount of running time for diskOperation class Initialization LOGArea Saving menu settings on a Copy Menu Settings109 CompactFlash cardLoading settings from a CompactFlash card Copy Menu SettingsWhen copying recording area settings Turn the jog dial to select LoadRS-485 specifications Interface Specifications111 Data formatSanyo protocol command table Interface Specifications113 SpecificationsSpecifications UL disclaimer statement Specifications DimensionsUnits mm 420 365115 SpecificationsTable of recording rate and times „ Example Recording to a 80 GB hard disk 100%-usage„ Example Recording to a 300 GB hard disk 100%-usage 116Program recording rate Table of recording rate settings117 FPS field/sec Table of pre-alarm recording timesMinutes 10s 20s 40s 119 Terminal board specifications120 121 Menu Setting SequenceHDD SET →P.92 Menu Setting SequenceRS-485 SET →P.96 Mask SET →P.104 General SET →P.86123 IndexIndex Setting recording conditions Setting the color levelTime/date search Timer recording Timer settings