2INITIAL SET
Setting time periods
A time period is setup by the two timers TIME PERIOD A and TIME PERIOD B, and the following procedure can be used to specify four different periods per day based on time period settings (for instance, early morning, morning, lunchtime, and night). For example, it is possible to set TIME PERIOD A for automatic screen selection and the period between TIME PERIOD B for the masking of monitor video using a gray pattern.
Morning to lunchtime: 6:00 to 11:00
Cameras No. 2, 4, 5, 7, 10 and 16 are masked.
01 | 02 | 03 | 04 |
05 | 06 | 07 | 08 |
09 | 10 | 11 | 12 |
13 | 14 | 15 | 16 |
Lunchtime: 11:00 to 13:00
Cameras No. 1, 4, 6, 11, 12, 13 and 14 are masked.
01 | 02 | 03 | 04 |
05 | 06 | 07 | 08 |
09 | 10 | 11 | 12 |
13 | 14 | 15 | 16 |
Lunchtime to night: 13:00 to 20:00
Cameras No. 1, 5, 9, 12 automatic selection is carried out.
01
05
09
12
Night to morning: 20:00 to 6:00
Cameras No. 1, 8 and 16 automatic selection is carried out.
01
08
16
Operations during the specified time periods
The following are functions with operations based on time periods.
When using time periods, be sure to set for each interval with the following menu.
Setting automatic selection of camera video
Set which automatically selected camera to display video from and the switching interval.
To do this, set “2.SEQUENCE SET” from <SCREEN SET>. (JP.102)
<SEQUENCE SET> |
| ||
MAIN MON. | FULL | : | 1S |
| QUAD | : | 1S |
MON.2 | FULL | : | 1S |
|
| INDIVIDUAL INTERVAL (SEC) | ||||
01: 1S | 02: 1S | 03: 1S | 04: 1S | |||
05: 1S | 06: 1S | 07: 1S | 08: 1S | |||
09: | 1S | 10: | 1S | 11: | 1S | 12: 1S |
13: | 1S | 14: | 1S | 15: | 1S | 16: 1S |
Masking camera video using a gray pattern
Use “3.MASK SET” from <SCREEN SET> to specify which cameras are to be displayed on the monitor and which are not. (JP.104)
|
| <MASK SET> |
|
|
|
| ||
|
|
| ||||||
TIME PERIOD : |
| |||||||
CH | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 |
MAIN MON. | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
MON.2 | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
NETWORK | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
CH | 09 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
MAIN MON. | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
MON.2 | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
NETWORK | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
Alarm recording using motion sensors
Alarm recording is activated by motion sensor.
To detect camera alarms, set “MOTION SENSOR” from <ALARM REC MODE SET>. (JP.81)
CH01
English | 57 |
