ADD. column flashes, Sanyo Coax, Sanyo RS485 | Sanyo DSR-3709

4GENERAL SET

4 Turn the jog dial to select a protocol and then turn the shuttle dial clockwise.

The “ADD.” column flashes.

		<CAMERA CONTROL SET>				K
CH PROTOCOL				CH PROTOCOL		ADD.
01	SANYO	---			OFF	---
02	OFF			10	OFF	---
03	OFF			11	OFF	---
04	OFF	---		12	OFF	---
05	OFF	---		13	OFF	---
06	OFF	---		14	OFF	---
07	OFF	---		15	OFF	---
08	OFF	---		16	OFF	---

[Settings] ( indicates default setting)

	Setting	Description

	OFF	Camera control is disabled.

		Camera control is enabled using
	SANYO COAX	SANYO (SSP) protocol coaxial super-
		imposition.

	SANYO RS485	Camera control is enabled using
	SANYO RS485	SANYO (SSP) protocol RS-485.
		SANYO (SSP) protocol RS-485.

	BBV COAX	Camera control is enabled using BBV
	BBV COAX	protocol.
		protocol.

	PELCO COAX	Camera control is enabled using
	PELCO COAX	PELCO protocol.
		PELCO protocol.

5 Set address (1 to 127) with the jog dial or numeric keys and turn the shuttle dial clockwise.

Address can be set only for “SANYO COAX” or “SANYO RS485” protocols.

	<CAMERA CONTROL SET>
CH PROTOCOL		ADD.			CH PROTOCOL		ADD.
01	SANYO COAX	011			09	OFF	---
02	OFF	---			10	OFF	---
03	OFF	---			11	OFF	---
04	OFF	---			12	OFF	---
05	OFF	---			13	OFF	---
06	OFF	---			14	OFF	---
07	OFF	---			15	OFF	---
08	OFF	---			16	OFF	---

6 Press the [EXIT/OSD] button.

The setting procedure is ended and the display returns to the normal screen.

EXIT/OSD

zCamera control is only available for camera models supporting coaxial control or SANYO SSP control. Other companies’ cameras such as RS-485 and RS- 422 are unsupported. For supported cameras, check the Sanyo homepage or ask at your local Sanyo dealer.

Sanyo website URL:

http://www.sanyosecurity.com

SETTINGS

98

English

Image 99

Sanyo DSR-3709, DSR-3716 instruction manual ADD. column flashes, Sanyo Coax, Sanyo RS485, BBV Coax, Pelco Coax

Contents

Page Service Precaution Introduction Main featuresAccessories Symbols used in this manual Contents Other Contents Settings Before USE „ Notes on replacing the HDD„ Handling a detached HDD unit Important recordings Backup batteryBefore USE Hard disk and cooling fan are consumable components Names and Functions of Parts DSR-3716Front panel DSR-3709 Names and Functions of Parts Jog dial inside and shuttle dial outside z During playback Timer button and indicator JP.23Alarm buttons JP.31 Menu Reset button JP.48 Rear panel Pin locations Installation and ConnectionsConnecting RS-485 terminals Basic connections Cable types Installation and ConnectionsRS-485 termination switch settings Connection Amp Sold separately Connecting Sanyo protocol devices Dome CamerasConnecting an amplifier Connecting Alarm in terminals Connecting Sensor Alarm OUT terminals Connecting Control terminalsConnecting the power cord 01-01-04 000000 REC Repeat EN a Alarm Preparing for USEOperation display area Preparing for USE Changing the position of the operation display areaChanging the language Example Setting 830 on October 26 Setting the time Normal recording area Alarm recording areaInternal hard disk Hard disk recording areas Press the No Camera Select button Viewing Video from a CameraViewing on a full screen Viewing on quad screens Viewing Video from a Camera Viewing on multi screens 9 screens/ 16 screensViewing on plus screen Press the Sequence button once again Viewing with automatic screen selectionViewing on the monitor Press the Sequence button Selecting Camera No for full screen Set MON.2 Display from Alarm Operation SET to ON. JP.84Displaying alarm video in full screen format Ending the monitor 2 setting procedure Normal recording Timer recordingPress the Timer button Recording When an alarm signal is detected Alarm recordingSet alarm recording End alarm recording Alarm Full indicator Pre-alarm recordingSet pre-alarm recording If an alarm is detected Press the PLAY/STOP button PlaybackPlaying video on a full screen Fast-forward and fast-rewind playback Move the zoom frame to the area to be magnified PlaybackChanging the playback speed Enlarging the playback video Press the Still button once again Viewing still imagesPress the Zoom button Press the Still button during playback Performing frame advance forward or reverse Playing video on multiple screensPress the Quad button during playback Searching from the Search screen Searching for Recorded Video Turn the jog dial to select the video for playback Alarm searchPress the appropriate Alarm button during playback Searching for Recorded Video Time/date search Alarm thumbnail searchTurn the jog dial and select Alarm Thumbnail Search Alarm number for the selected recording will start to flash If no recording exists for the specified time View Selected image is displayed on the preview screen Archive area searchMotion detection search Turn the jog dial to select Archive Area Search END Example AlarmExample Start Set the motion sensor to use for searching Carry out motion sensor setting again Turn the jog dial to select Preview„ If not Found is displayed Copying video to a CD-R/RW JP.45 Saving Copying Recorded VideoCopying video to the hard disk’s archive area JP.39 Copying video to a CompactFlash card or Microdrive JP.41 Example Copying a specified 10-second portion of video Saving Copying Recorded VideoCopying video to the hard disk’s archive area Press the Copy button Turn the jog dial to select Seconds „ To cancel a copy operation Copying video to a CompactFlash card or Microdrive Insert a CompactFlash cardInsertion method Removal method ‹PICTURES When this has been completed, Copy Finished ! is displayed Viewing images copied to a CompactFlash card on a PC Printing images from CompactFlash cards quick print Dcim Copying video to CD-R/RW Connect a recordable CD-R/RW drive and insert a diskTurn the jog dial to select the unit Formatting a CompactFlash card and CD-RW Viewing images copied to a CD-R/RW on a PC Turn the jog dial to select a menu Menu Configuration and OperationsMoving from the Main Menu to a sub-menu or setting screen Basic menu operations Entering numbers with the numeric keys Menu Configuration and OperationsRestoring menu setting items to their default values Movement and confirmation in sub-menus and setting screens Main menu Sub-menu configuration Color Level JP.105 Sub menu Setting item Settings or display contentMulti Screen Sequence SET Initial SET Initial settingsSetting the daylight saving Initial SET is used to make the following setting Initial SET Turn the jog dial to select Mode under Daylight SavingTurn the jog dial to change the settings When USE is selected for Daylight Saving To C Terminal To Clock SET in terminal External clock settingTurn the jog dial and move the cursor to ADJUST. Time Cursor moves to the time Displayed Detecting connected cameras Repeat steps 5 and 6 to enter the remaining characters Setting camera titlesExample Setting the title HALL-1F for Camera No Turn the jog dial to select H Set the month and day for item No Setting holidaysTurn the shuttle dial clockwise after setting Example Setting November 17 as a holiday Setting time periods Time period settings Example 1 Setting periods using Time Period aTime Period a settings Set T-1 to 6 AM Time period operations settings Time Period a flashesCursor moves to Mask Record SET Settings for recordingNormal recording easy setup Camera Select buttons Timer button Jog dial Record SET screen is displayed Setting based on recording daysCursor moves to Timer Recording DLY Record SET Example on Set Picture QualitySet Audio Recording Turn the shuttle dial counter-clockwise Setting based on recording rate Alarm Displaying the recording areasRecording Area SET screen is displayed „ If the normal recording area is set to 0% „ Default hard disk settingsChanging recording areas „ Recording area allocations Hard disk is initialized Setting overwrite permissionCursor moves to Area Full Reset Turn the shuttle dial counter- clockwise Setting overwriting for the normal recording area Setting recording conditions 01-01-04 000000 REC 1% Display area CapacityOFF Setting series recording Starting and stopping series recording Set depending on your recording needs Turn the shuttle dial clockwise Press the EXIT/OSD button Setting auto deletingSetting normal recording Turn the jog dial to select the storage period Set REC Rate Set REC Program GroupExample P-1 Cursor moves to 0.5 from Select Individual Camera Rate FPS Setting program recordingCameras No through No are available for the DSR-3709 Selects Program No through Program No Timer setting items Timer settings Start time flashes as „ To change a displayed setting itemTimer SET screen is displayed Cursor moves to the SUN row SUN from the Week column flashes All setting items are cleared Menu Reset button Make settings in the Week and Start columnsTo cancel all set timer reservations Timer reservations spanning more than 24 hours Setting alarm recording Timer recording using an external timerTo set alarm recording Alarm REC Mode SET screen is displayed Alarm recordingsMaximum number Set REC Rate and Duration Set Alarm InterleaveWhen alarm recording settings have been completed To set pre-alarm recording Cursor moves to recording rate and duration When pre-alarm recording settings have been completedREC Rate for PRE-ALARM Recording flashes Default setting 1 MIN Cursor moves to Alarm Trigger Setting the alarm trigger Setting the motion sensors Use this procedure to set other sensor positions To B Cursor moves to ModeFlashes for the Mode „ To stop motion sensor recording Example Alarm Setting alarm operation and displaySetting alarm display OFF flashes in the Alarm Retrigger field First Canceling alarmsCursor moves to Alarm Priority Switch EXIT/OSD button Shuttle dial General settingsSetting data display General SET Display SET screen is displayed Setting display for video lossGeneral SET Perform the following if so required Disk Error default setting on Setting the buzzerAlarm default setting OFF Disk Full default setting on Example Setting 123456AB as a password Setting the security lock„ Operation after setting passwords Setting the administrator password Turn the jog dial to move the cursor to User Use the same procedure to set 123456ABFollowing this, turn the shuttle dial clockwise Turn the jog dial to select on Turn the jog dial to move cursor to Turn the jog dial to move cursor to REC Control HDD SET screen is displayed Cursor moves to Disk Initialize Setting and initializing the hard diskInitialization of hard disk erases all contents Initializing the hard disk Network settings Expanding the hard disk capacityMaking network connections Making network settings Set Port Set IP AddressSet Subnet Mask Set Gateway General SET screen appears Setting RS-485When setting has been completed, press the EXIT/OSD button Cursor moves to Alarm Info Protocol field flashes Setting camera controlCursor moves to Address Camera Control SET screen is displayed BBV Coax ADD. column flashesSanyo Coax Sanyo RS485 Finishing dome camera operation When zoomingPress the FUNC. button Operating dome cameras with the digital video recorder Example Displaying Camera No in quad position Setting quad, multi 9 and 16 displaySetting multi screen positions Screen SET 101 Screen SETChecking modified screen positions Automatic selection is set to a period of 5 seconds Setting the automatic selection periodSetting the main monitor and monitor 1S flashes 103 MAIN/MON.2 Monitor SET screen is displayedStarts to flash for Time Period Setting masks Cursor moves to Mask SETMask SET screen is displayed Setting the color level 105Color Level SET screen is displayed 106 Displays the total amount of running time for disk Power LOSS/USED TimePower LOSS/USED Time screen is displayed 107 Initialization LOG AreaOperation class CompactFlash card Copy Menu SettingsSaving menu settings on a 109 Turn the jog dial to select Load Copy Menu SettingsLoading settings from a CompactFlash card When copying recording area settings Data format Interface SpecificationsRS-485 specifications 111 Sanyo protocol command table Interface Specifications Specifications Specifications113 420 365 Specifications DimensionsUL disclaimer statement Units mm „ Example Recording to a 80 GB hard disk 100%-usage Specifications115 Table of recording rate and times „ Example Recording to a 300 GB hard disk 100%-usage 116 Table of recording rate settings 117Program recording rate Table of pre-alarm recording times Minutes 10s 20s 40sFPS field/sec 119 Terminal board specifications 120 121 Menu Setting Sequence General SET →P.86 Menu Setting SequenceHDD SET →P.92 RS-485 SET →P.96 Mask SET →P.104 123 Index Setting recording conditions Setting the color level Time/date search Timer recording Timer settingsIndex