Sanyo DSR-3716, DSR-3709 instruction manual Searching for Recorded Video, Alarm search

5SEARCHING FOR RECORDED VIDEO

Alarm search

Use the following procedure to search and playback all video stored in the alarm recording area. If pre-alarm video is being recorded, playback will start from immediately before the alarm.

1 Press the [SEARCH] button while the digital video recorder is recording or stopped.

The SEARCH indicator lights up and the <SEARCH> screen is displayed.

SEARCH

<SEARCH>
ALARM SEARCH	->
ALARM THUMBNAIL SEARCH	->
TIME/DATE SEARCH	->
ARCHIVE AREA SEARCH	->
MOTION DETECTION SEARCH	->

MOVE:JOG SELECT:SHUTTLE

2 Turn the jog dial to select “ALARM SEARCH”, and then turn the shuttle dial clockwise.

The <ALARM SEARCH> screen is displayed.

The eight most-recent alarm recordings are displayed.

(1)	(2)		(3)	(4)
		<ALARM SEARCH>
NO	DATE	TIME	CH	TOTAL ALARMS
0016 01-05		09:53	1	00016
0015 01-05		09:53	1
0014 01-05		09:53	1
0013 01-05		09:53	1	(5)
0012 01-05		09:52	1
0011 01-05		09:51	1
0010 01-05		09:51	1
0009 01-05		03:10	1

MOVE:JOG SELECT:SHUTTLE

(1)NO:

Indicates the alarm number.

(2)DATE/TIME:

Indicates the date and time at which the alarm video was recorded.

(3)CH:

Indicates the alarm video’s channel (or camera number).

(4)TOTAL ALARMS:

Indicates the total number of alarm video recordings.

(5)Preview:

Displays the selected alarm video.

3 Turn the jog dial to select the video for playback.

A preview of the selected alarm video is displayed in the preview screen. In this case, the video from the instant of alarm occurrence is displayed.

zTo display the next or previous recording

Turn the jog dial clockwise or counter-clockwise accordingly.

zTo leave search mode

Press the [SEARCH] button. SEARCH indicator turns off.

4 Turn the shuttle dial clockwise.

The selected recording is played back in full screen mode.

01-01-04 00:00:00 EN A ALARM 0000

02

„To view pre-alarm video

After beginning playback of an alarm recording identified by an alarm search, use the shuttle dial to reverse playback.

To view alarm video before or after the current playback

1 Press the appropriate [ALARM] button during playback.

ALARM 01-01-04 00:00:00 EN A ALARM 0000

02

zEach time the “ ” button is pressed, playback will skip to the preceding alarm video recording.

zEach time the “ ” button is pressed, playback will skip to the subsequent alarm video recording.

zWhen playback is performed after an alarm search, the frame at the start and end of each alarm recording will be paused. Press the appropriate [ALARM] button to play the previous or next alarm recording.

zYou can use the front-panel buttons, the shuttle dial, and the jog dial to perform operations such as pause and fast-forward.

English 31