Screen SET, Setting quad, multi 9 and 16 display | Sanyo DSR-3709

5SCREEN SET

Main Menu

<MAIN MENU>
1.INITIAL SET	->
2.RECORD SET	->
3.GENERAL SET	->
4.SCREEN SET	->
5.POWER LOSS/USED TIME	->
6.INITIALIZATION LOG	->
7.COPY MENU SETTINGS	->
MOVE:JOG SELECT:SHUTTLE

[MENU] button

[QUAD] button

[EXIT/OSD] button Shuttle dial

CARD

MENU

RESET

EJECT

Jog dial

Setting quad, multi 9 and 16 display

Use the following procedure to change the display positions for cameras in quad, multi 9 and 16 screens.

01	02	01	02
05	06	05	04
03	04	03	06
01	02	01	02

zEach camera can only be displayed in one position on any screenP.

Setting multi screen positions

Example: Displaying Camera No. 05 in quad position 01

On the DSR-3709, select cameras No. 01 through No. 09.

1 Press the [MENU] button and turn the jog dial to select to “4. SCREEN SET”, and then turn the shuttle dial clockwise.

The <SCREEN SET> screen is displayed. The cursor moves to “1. MULTI SCREEN”.

MENU	<SCREEN SET>
	<SCREEN SET>
	1.MULTI SCREEN	:	NORMAL
	QUAD POSITION SET			->
	MULTI 9 POSITION SET			->
	MULTI 16 POSITION SET			->
	2.SEQUENCE SET	:	1S
	SEQUENCE SET			->
	MAIN/MON.2 MONITOR SET			->
	3.MASK	:	OFF
	MASK SET			->
	4.COLOR LEVEL SET			->

2 Turn the shuttle dial clockwise.

“NORMAL” flashes for “1. MULTI SCREEN”.

<SCREEN
1.MULTI SCREEN		NORMAL
QUAD POSITION SET			-
MULTI 9 POSITION SET			->
MULTI 16 POSITION SET			->
2.SEQUENCE SET	:	1S
SEQUENCE SET			->
MAIN/MON.2 MONITOR SET			->
3.MASK	:	OFF
MASK SET			->
4.COLOR LEVEL SET			->

3 Turn the jog dial to select “CHANGE”, and then turn the shuttle dial clockwise.

The cursor moves to “QUAD POSITION SET”.

[Settings] ( indicates default setting)

Setting	Description

NORMAL	The display sequence for cameras is not changed.

CHANGE	The display sequence for cameras is changed.

		<SCREEN SET>
	1.MULTI SCREEN		:	CHANGE
		QUAD POSITION SET			->
		MULTI 9 POSITION SET			->
		MULTI 16 POSITION SET			->
	2.SEQUENCE SET		:	1S
		SEQUENCE SET			->
		MAIN/MON.2 MONITOR SET			->
	3.MASK		:	OFF
		MASK SET			->
	4.COLOR LEVEL SET				->

SETTINGS

100

English

Image 101

Sanyo DSR-3709, DSR-3716 instruction manual Screen SET, Setting quad, multi 9 and 16 display, Setting multi screen positions

Contents

Page Service Precaution Accessories Main featuresSymbols used in this manual Introduction Contents Other Contents Settings „ Handling a detached HDD unit Before USE„ Notes on replacing the HDD Before USE Backup batteryHard disk and cooling fan are consumable components Important recordings Front panel Names and Functions of PartsDSR-3716 DSR-3709 Names and Functions of Parts Alarm buttons JP.31 Timer button and indicator JP.23Menu Reset button JP.48 Jog dial inside and shuttle dial outside z During playback Rear panel Connecting RS-485 terminals Installation and ConnectionsBasic connections Pin locations RS-485 termination switch settings Installation and ConnectionsConnection Cable types Connecting an amplifier Connecting Sanyo protocol devices Dome CamerasConnecting Alarm in terminals Amp Sold separately Connecting the power cord Connecting Sensor Alarm OUT terminalsConnecting Control terminals Operation display area 01-01-04 000000 REC Repeat EN a AlarmPreparing for USE Changing the language Preparing for USEChanging the position of the operation display area Example Setting 830 on October 26 Setting the time Internal hard disk Alarm recording areaHard disk recording areas Normal recording area Viewing on a full screen Viewing Video from a CameraViewing on quad screens Press the No Camera Select button Viewing on plus screen Viewing Video from a CameraViewing on multi screens 9 screens/ 16 screens Viewing on the monitor Viewing with automatic screen selectionPress the Sequence button Press the Sequence button once again Displaying alarm video in full screen format Set MON.2 Display from Alarm Operation SET to ON. JP.84Ending the monitor 2 setting procedure Selecting Camera No for full screen Press the Timer button Timer recordingRecording Normal recording Set alarm recording Alarm recordingEnd alarm recording When an alarm signal is detected Set pre-alarm recording Pre-alarm recordingIf an alarm is detected Alarm Full indicator Playing video on a full screen PlaybackFast-forward and fast-rewind playback Press the PLAY/STOP button Changing the playback speed PlaybackEnlarging the playback video Move the zoom frame to the area to be magnified Press the Zoom button Viewing still imagesPress the Still button during playback Press the Still button once again Press the Quad button during playback Performing frame advance forward or reversePlaying video on multiple screens Searching from the Search screen Searching for Recorded Video Press the appropriate Alarm button during playback Alarm searchSearching for Recorded Video Turn the jog dial to select the video for playback Turn the jog dial and select Alarm Thumbnail Search Alarm thumbnail searchAlarm number for the selected recording will start to flash Time/date search If no recording exists for the specified time View Motion detection search Archive area searchTurn the jog dial to select Archive Area Search Selected image is displayed on the preview screen Example Example AlarmStart END Set the motion sensor to use for searching „ If not Found is displayed Carry out motion sensor setting againTurn the jog dial to select Preview Copying video to the hard disk’s archive area JP.39 Saving Copying Recorded VideoCopying video to a CompactFlash card or Microdrive JP.41 Copying video to a CD-R/RW JP.45 Copying video to the hard disk’s archive area Saving Copying Recorded VideoPress the Copy button Example Copying a specified 10-second portion of video Turn the jog dial to select Seconds „ To cancel a copy operation Insertion method Removal method Copying video to a CompactFlash card or MicrodriveInsert a CompactFlash card ‹PICTURES When this has been completed, Copy Finished ! is displayed Viewing images copied to a CompactFlash card on a PC Printing images from CompactFlash cards quick print Dcim Turn the jog dial to select the unit Copying video to CD-R/RWConnect a recordable CD-R/RW drive and insert a disk Formatting a CompactFlash card and CD-RW Viewing images copied to a CD-R/RW on a PC Moving from the Main Menu to a sub-menu or setting screen Menu Configuration and OperationsBasic menu operations Turn the jog dial to select a menu Restoring menu setting items to their default values Menu Configuration and OperationsMovement and confirmation in sub-menus and setting screens Entering numbers with the numeric keys Main menu Sub-menu configuration Multi Screen Sub menu Setting item Settings or display contentSequence SET Color Level JP.105 Setting the daylight saving Initial settingsInitial SET is used to make the following setting Initial SET Turn the jog dial to change the settings Turn the jog dial to select Mode under Daylight SavingWhen USE is selected for Daylight Saving Initial SET Turn the jog dial and move the cursor to ADJUST. Time External clock settingCursor moves to the time To C Terminal To Clock SET in terminal Displayed Detecting connected cameras Example Setting the title HALL-1F for Camera No Setting camera titlesTurn the jog dial to select H Repeat steps 5 and 6 to enter the remaining characters Turn the shuttle dial clockwise after setting Setting holidaysExample Setting November 17 as a holiday Set the month and day for item No Setting time periods Time Period a settings Set T-1 to 6 AM Time period settingsExample 1 Setting periods using Time Period a Cursor moves to Mask Time period operations settingsTime Period a flashes Normal recording easy setup Settings for recordingCamera Select buttons Timer button Jog dial Record SET Cursor moves to Timer Recording DLY Setting based on recording daysRecord SET Record SET screen is displayed Set Audio Recording Set Picture QualityTurn the shuttle dial counter-clockwise Example on Setting based on recording rate Recording Area SET screen is displayed AlarmDisplaying the recording areas Changing recording areas „ Default hard disk settings„ Recording area allocations „ If the normal recording area is set to 0% Cursor moves to Area Full Reset Setting overwrite permissionTurn the shuttle dial counter- clockwise Hard disk is initialized Setting overwriting for the normal recording area Setting recording conditions OFF 01-01-04 000000 REC 1%Display area Capacity Setting series recording Starting and stopping series recording Set depending on your recording needs Setting normal recording Setting auto deletingTurn the jog dial to select the storage period Turn the shuttle dial clockwise Press the EXIT/OSD button Example P-1 Set REC RateSet REC Program Group Cameras No through No are available for the DSR-3709 Setting program recordingSelects Program No through Program No Cursor moves to 0.5 from Select Individual Camera Rate FPS Timer setting items Timer settings Timer SET screen is displayed Cursor moves to the SUN row „ To change a displayed setting itemSUN from the Week column flashes Start time flashes as To cancel all set timer reservations Make settings in the Week and Start columnsTimer reservations spanning more than 24 hours All setting items are cleared Menu Reset button To set alarm recording Setting alarm recordingTimer recording using an external timer Maximum number Alarm REC Mode SET screen is displayedAlarm recordings When alarm recording settings have been completed Set Alarm InterleaveTo set pre-alarm recording Set REC Rate and Duration REC Rate for PRE-ALARM Recording flashes When pre-alarm recording settings have been completedDefault setting 1 MIN Cursor moves to Alarm Trigger Cursor moves to recording rate and duration Setting the alarm trigger Setting the motion sensors Use this procedure to set other sensor positions Flashes for the Mode Cursor moves to Mode„ To stop motion sensor recording To B Setting alarm display Setting alarm operation and displayOFF flashes in the Alarm Retrigger field Example Alarm Cursor moves to Alarm Priority Canceling alarmsSwitch First Setting data display General settingsGeneral SET EXIT/OSD button Shuttle dial General SET Setting display for video lossPerform the following if so required Display SET screen is displayed Alarm default setting OFF Setting the buzzerDisk Full default setting on Disk Error default setting on „ Operation after setting passwords Setting the security lockSetting the administrator password Example Setting 123456AB as a password Following this, turn the shuttle dial clockwise Use the same procedure to set 123456ABTurn the jog dial to select on Turn the jog dial to move the cursor to User Turn the jog dial to move cursor to Turn the jog dial to move cursor to REC Control Initialization of hard disk erases all contents Setting and initializing the hard diskInitializing the hard disk HDD SET screen is displayed Cursor moves to Disk Initialize Making network connections Network settingsExpanding the hard disk capacity Making network settings Set Subnet Mask Set IP AddressSet Gateway Set Port When setting has been completed, press the EXIT/OSD button Setting RS-485Cursor moves to Alarm Info General SET screen appears Cursor moves to Address Setting camera controlCamera Control SET screen is displayed Protocol field flashes Sanyo Coax ADD. column flashesSanyo RS485 BBV Coax Press the FUNC. button When zoomingOperating dome cameras with the digital video recorder Finishing dome camera operation Setting multi screen positions Setting quad, multi 9 and 16 displayScreen SET Example Displaying Camera No in quad position Checking modified screen positions 101Screen SET Setting the main monitor and monitor Setting the automatic selection period1S flashes Automatic selection is set to a period of 5 seconds Starts to flash for Time Period 103MAIN/MON.2 Monitor SET screen is displayed Mask SET screen is displayed Setting masksCursor moves to Mask SET Color Level SET screen is displayed Setting the color level105 106 Power LOSS/USED Time screen is displayed Power LOSS/USED Time107 Displays the total amount of running time for disk Operation class Initialization LOGArea Saving menu settings on a Copy Menu Settings109 CompactFlash card Loading settings from a CompactFlash card Copy Menu SettingsWhen copying recording area settings Turn the jog dial to select Load RS-485 specifications Interface Specifications111 Data format Sanyo protocol command table Interface Specifications 113 SpecificationsSpecifications UL disclaimer statement Specifications DimensionsUnits mm 420 365 115 SpecificationsTable of recording rate and times „ Example Recording to a 80 GB hard disk 100%-usage „ Example Recording to a 300 GB hard disk 100%-usage 116 Program recording rate Table of recording rate settings117 FPS field/sec Table of pre-alarm recording timesMinutes 10s 20s 40s 119 Terminal board specifications 120 121 Menu Setting Sequence HDD SET →P.92 Menu Setting SequenceRS-485 SET →P.96 Mask SET →P.104 General SET →P.86 123 Index Index Setting recording conditions Setting the color levelTime/date search Timer recording Timer settings