Sanyo DSR-3709, DSR-3716 instruction manual 01-01-04 000000 REC 1%, Display area Capacity, Off

3RECORD SET

2 Turn the jog dial to select setting (OFF, for example), and then turn the shuttle dial clockwise.

“REMAINING DISK WARNING” changes to “1%” from “**”.

[Settings] (‹ indicates default setting)

Setting	Description
OFF	Recording is stopped when the normal recording area
	becomes full.

‹Overwriting automatically starts from the beginning of ON the normal recording area when it becomes full.

.

	<RECORDING CONDITIONS SET>
	NORMAL RECORDING AREA
	OVERWRITE	: OFF
	ALARM RECORDING AREA
	OVERWRITE	: ON
Remaining disk	REMAINING DISK WARNING	: 1 %
warning	SERIES REC	: OFF
	AUTO DELETE	: OFF

zIf this is set to “OFF”, the FULL indicator or ALARM FULL indicator will start to flash when the remaining hard-disk capacity reaches the percentage set for

“REMAINING DISK WARNING”.

3 Use the same procedure to set “ALARM RECORDING AREA” to “OFF”.

4 Turn the jog dial to select “REMAINING DISK WARNING”, and then turn the shuttle dial clockwise.

5 Turn the jog dial to set the remaining capacity, and then turn the shuttle dial clockwise.

The remaining capacity can be set anywhere between 1% (default) and 10%.

<RECORDING CONDITIONS SET> NORMAL RECORDING AREA

OVERWRITE : OFF ALARM RECORDING AREA

OVERWRITE : OFF

REMAINING DISK WARNING	: 1 %
SERIES REC	: OFF
AUTO DELETE	: OFF

6 Press the [EXIT/OSD] button.

The setting procedure is ended and the display returns to the normal screen.

EXIT/OSD

Turn “OVERWRITE” to “OFF” to display the remaining memory for the current recording area on the operating display.

Also, if remaining memory reaches the set percentage, the FULL indictor flashes for normal recording area and the ALARM FULL indicator flashes for the alarm recording area. When the remaining memory runs out, the indicator switches to a permanently lit condition and recording stops automatically.

FULL indicator ALARM FULL indicator

Operation		Remaining
display area		capacity
		display
01-01-04 00:00:00 REC 1%	EN A ALARM 0000
02

When the normal recording area or the alarm recording area become full

Make a new “AREA FULL RESET” setting for “NORMAL RECORDING AREA” and “ALARM RECORDING AREA” on the <RECORDING AREA SET> screen. (JP.66)

	<RECORDING AREA SET>
TOTAL CAPACITY			:	82GB
NORMAL RECORDING AREA			:	80	%
	AREA FULL RESET	->
ALARM RECORDING AREA			:	19	%
	AREA FULL RESET	->
ARCHIVE AREA			:	1	%
	AREA FULL RESET	->

CAUTION : WHEN THE AREA SETTING IS CHANGED,

THE WHOLE AREA WILL BE INITIALIZED !

SETTINGS

68 English