Viewing Video from a Camera, Press the Quad button | Sanyo DSR-3716

2VIEWING VIDEO FROM A CAMERA

[MULTI] button

[SEQUENCE] button

CARD

MENU

RESET

EJECT

[PLUS] button

[CAMERA SELECT] buttons[MON2] button [QUAD] button

Viewing on a full screen

Example: Selecting Camera 2

1 Press the No. 2 [CAMERA SELECT] button.

The No. 2 CAMERA SELECT indicator lights up and video from Camera 2 is displayed on a full screen.

02

Viewing enlarged live images

Images can be enlarged while monitoring on a full screen. Operations are the same as “Enlarging the playback video”. See P.27 for more details.

Viewing on quad screens

Images from multiple connected cameras can be displayed simultaneously.

1 Press the [QUAD] button.

The QUAD indicator lights up and video from four separate cameras is displayed simultaneously.

Video from Camera No. 1 through Camera No. 4 is displayed.

QUAD
01	02
03	04

2 To view video from other cameras, press the [QUAD] button again.

Each time this button is pressed, the four images on the quad screen change, in order of cameras No. 1-4, 5-8, 9- 12 and 13-16.

On the DSR-3709, the images change in order of cameras No. 1-4, 5-8, 9-3, etc.

QUAD
05	06
07	08

3 To return to full screen display, press the [CAMERA SELECT] button.

English

19

Image 20

Sanyo DSR-3716 Viewing Video from a Camera, Viewing on a full screen, Viewing on quad screens, Press the Quad button

Contents

Page Precaution Service Main features AccessoriesSymbols used in this manual Introduction Contents Contents Settings Other „ Handling a detached HDD unit Before USE„ Notes on replacing the HDD Backup battery Before USEHard disk and cooling fan are consumable components Important recordings Front panel Names and Functions of PartsDSR-3716 Names and Functions of Parts DSR-3709 Timer button and indicator JP.23 Alarm buttons JP.31Menu Reset button JP.48 Jog dial inside and shuttle dial outside z During playback Rear panel Installation and Connections Connecting RS-485 terminalsBasic connections Pin locations Installation and Connections RS-485 termination switch settingsConnection Cable types Connecting Sanyo protocol devices Dome Cameras Connecting an amplifierConnecting Alarm in terminals Amp Sold separately Connecting the power cord Connecting Sensor Alarm OUT terminalsConnecting Control terminals Operation display area 01-01-04 000000 REC Repeat EN a AlarmPreparing for USE Changing the language Preparing for USEChanging the position of the operation display area Setting the time Example Setting 830 on October 26 Alarm recording area Internal hard diskHard disk recording areas Normal recording area Viewing Video from a Camera Viewing on a full screenViewing on quad screens Press the No Camera Select button Viewing on plus screen Viewing Video from a CameraViewing on multi screens 9 screens/ 16 screens Viewing with automatic screen selection Viewing on the monitorPress the Sequence button Press the Sequence button once again Set MON.2 Display from Alarm Operation SET to ON. JP.84 Displaying alarm video in full screen formatEnding the monitor 2 setting procedure Selecting Camera No for full screen Timer recording Press the Timer buttonRecording Normal recording Alarm recording Set alarm recordingEnd alarm recording When an alarm signal is detected Pre-alarm recording Set pre-alarm recordingIf an alarm is detected Alarm Full indicator Playback Playing video on a full screenFast-forward and fast-rewind playback Press the PLAY/STOP button Playback Changing the playback speedEnlarging the playback video Move the zoom frame to the area to be magnified Viewing still images Press the Zoom buttonPress the Still button during playback Press the Still button once again Press the Quad button during playback Performing frame advance forward or reversePlaying video on multiple screens Searching for Recorded Video Searching from the Search screen Alarm search Press the appropriate Alarm button during playbackSearching for Recorded Video Turn the jog dial to select the video for playback Alarm thumbnail search Turn the jog dial and select Alarm Thumbnail SearchAlarm number for the selected recording will start to flash Time/date search View If no recording exists for the specified time Archive area search Motion detection searchTurn the jog dial to select Archive Area Search Selected image is displayed on the preview screen Example Alarm ExampleStart END Set the motion sensor to use for searching „ If not Found is displayed Carry out motion sensor setting againTurn the jog dial to select Preview Saving Copying Recorded Video Copying video to the hard disk’s archive area JP.39Copying video to a CompactFlash card or Microdrive JP.41 Copying video to a CD-R/RW JP.45 Saving Copying Recorded Video Copying video to the hard disk’s archive areaPress the Copy button Example Copying a specified 10-second portion of video „ To cancel a copy operation Turn the jog dial to select Seconds Insertion method Removal method Copying video to a CompactFlash card or MicrodriveInsert a CompactFlash card When this has been completed, Copy Finished ! is displayed ‹PICTURES Printing images from CompactFlash cards quick print Viewing images copied to a CompactFlash card on a PC Dcim Turn the jog dial to select the unit Copying video to CD-R/RWConnect a recordable CD-R/RW drive and insert a disk Viewing images copied to a CD-R/RW on a PC Formatting a CompactFlash card and CD-RW Menu Configuration and Operations Moving from the Main Menu to a sub-menu or setting screenBasic menu operations Turn the jog dial to select a menu Menu Configuration and Operations Restoring menu setting items to their default valuesMovement and confirmation in sub-menus and setting screens Entering numbers with the numeric keys Sub-menu configuration Main menu Sub menu Setting item Settings or display content Multi ScreenSequence SET Color Level JP.105 Initial settings Setting the daylight savingInitial SET is used to make the following setting Initial SET Turn the jog dial to select Mode under Daylight Saving Turn the jog dial to change the settingsWhen USE is selected for Daylight Saving Initial SET External clock setting Turn the jog dial and move the cursor to ADJUST. TimeCursor moves to the time To C Terminal To Clock SET in terminal Detecting connected cameras Displayed Setting camera titles Example Setting the title HALL-1F for Camera NoTurn the jog dial to select H Repeat steps 5 and 6 to enter the remaining characters Setting holidays Turn the shuttle dial clockwise after settingExample Setting November 17 as a holiday Set the month and day for item No Setting time periods Time Period a settings Set T-1 to 6 AM Time period settingsExample 1 Setting periods using Time Period a Cursor moves to Mask Time period operations settingsTime Period a flashes Settings for recording Normal recording easy setupCamera Select buttons Timer button Jog dial Record SET Setting based on recording days Cursor moves to Timer Recording DLYRecord SET Record SET screen is displayed Set Picture Quality Set Audio RecordingTurn the shuttle dial counter-clockwise Example on Setting based on recording rate Recording Area SET screen is displayed AlarmDisplaying the recording areas „ Default hard disk settings Changing recording areas„ Recording area allocations „ If the normal recording area is set to 0% Setting overwrite permission Cursor moves to Area Full ResetTurn the shuttle dial counter- clockwise Hard disk is initialized Setting recording conditions Setting overwriting for the normal recording area OFF 01-01-04 000000 REC 1%Display area Capacity Setting series recording Set depending on your recording needs Starting and stopping series recording Setting auto deleting Setting normal recordingTurn the jog dial to select the storage period Turn the shuttle dial clockwise Press the EXIT/OSD button Example P-1 Set REC RateSet REC Program Group Setting program recording Cameras No through No are available for the DSR-3709Selects Program No through Program No Cursor moves to 0.5 from Select Individual Camera Rate FPS Timer settings Timer setting items „ To change a displayed setting item Timer SET screen is displayed Cursor moves to the SUN rowSUN from the Week column flashes Start time flashes as Make settings in the Week and Start columns To cancel all set timer reservationsTimer reservations spanning more than 24 hours All setting items are cleared Menu Reset button To set alarm recording Setting alarm recordingTimer recording using an external timer Maximum number Alarm REC Mode SET screen is displayedAlarm recordings Set Alarm Interleave When alarm recording settings have been completedTo set pre-alarm recording Set REC Rate and Duration When pre-alarm recording settings have been completed REC Rate for PRE-ALARM Recording flashesDefault setting 1 MIN Cursor moves to Alarm Trigger Cursor moves to recording rate and duration Setting the motion sensors Setting the alarm trigger Use this procedure to set other sensor positions Cursor moves to Mode Flashes for the Mode„ To stop motion sensor recording To B Setting alarm operation and display Setting alarm displayOFF flashes in the Alarm Retrigger field Example Alarm Canceling alarms Cursor moves to Alarm PrioritySwitch First General settings Setting data displayGeneral SET EXIT/OSD button Shuttle dial Setting display for video loss General SETPerform the following if so required Display SET screen is displayed Setting the buzzer Alarm default setting OFFDisk Full default setting on Disk Error default setting on Setting the security lock „ Operation after setting passwordsSetting the administrator password Example Setting 123456AB as a password Use the same procedure to set 123456AB Following this, turn the shuttle dial clockwiseTurn the jog dial to select on Turn the jog dial to move the cursor to User Turn the jog dial to move cursor to REC Control Turn the jog dial to move cursor to Setting and initializing the hard disk Initialization of hard disk erases all contentsInitializing the hard disk HDD SET screen is displayed Cursor moves to Disk Initialize Making network connections Network settingsExpanding the hard disk capacity Making network settings Set IP Address Set Subnet MaskSet Gateway Set Port Setting RS-485 When setting has been completed, press the EXIT/OSD buttonCursor moves to Alarm Info General SET screen appears Setting camera control Cursor moves to AddressCamera Control SET screen is displayed Protocol field flashes ADD. column flashes Sanyo CoaxSanyo RS485 BBV Coax When zooming Press the FUNC. buttonOperating dome cameras with the digital video recorder Finishing dome camera operation Setting quad, multi 9 and 16 display Setting multi screen positionsScreen SET Example Displaying Camera No in quad position Checking modified screen positions 101Screen SET Setting the automatic selection period Setting the main monitor and monitor1S flashes Automatic selection is set to a period of 5 seconds Starts to flash for Time Period 103MAIN/MON.2 Monitor SET screen is displayed Mask SET screen is displayed Setting masksCursor moves to Mask SET Color Level SET screen is displayed Setting the color level105 106 Power LOSS/USED Time Power LOSS/USED Time screen is displayed107 Displays the total amount of running time for disk Operation class Initialization LOGArea Copy Menu Settings Saving menu settings on a109 CompactFlash card Copy Menu Settings Loading settings from a CompactFlash cardWhen copying recording area settings Turn the jog dial to select Load Interface Specifications RS-485 specifications111 Data format Interface Specifications Sanyo protocol command table 113 SpecificationsSpecifications Specifications Dimensions UL disclaimer statementUnits mm 420 365 Specifications 115Table of recording rate and times „ Example Recording to a 80 GB hard disk 100%-usage 116 „ Example Recording to a 300 GB hard disk 100%-usage Program recording rate Table of recording rate settings117 FPS field/sec Table of pre-alarm recording timesMinutes 10s 20s 40s Terminal board specifications 119 120 Menu Setting Sequence 121 Menu Setting Sequence HDD SET →P.92RS-485 SET →P.96 Mask SET →P.104 General SET →P.86 Index 123 Index Setting recording conditions Setting the color levelTime/date search Timer recording Timer settings