3RECORD SET
zThe recording rate is automatically calculated based on recording settings and the number of connected cameras, and this is indicated by “REC RATE”. All cameras will record at this rate. If a valid figure cannot be calculated, “ERROR!” will be displayed.
zWhen easy setup settings and individual settings are both set, the most recent settings override previous settings.
zEasy setup settings cannot be used with program recording or
Setting based on recording rate
4 Turn the jog dial to select “REC RATE BASE”, and then turn the shuttle dial clockwise.
The <REC RATE BASE> screen is displayed with the cursor positioned on “REC RATE”.
The number of detected cameras is indicated by
“NUMBER OF CAMERAS”.
<REC RATE BASE>
REC RATE | : |
TIMER RECORDING(DLY) : OFF | |
START | STOP |
PICTURE QUALITY | : ENHANCED |
AUDIO RECORDING | : OFF |
NUMBER OF CAMERAS | : 2 |
RECORDING DURATION | : |
zConfirm that the number of cameras connected to the digital video recorder is the same as the number of displayed recording cameras. If this is not the case, check the wiring between cameras and the digital video recorder and then carry out “CAMERA DETECT”. (JP.54)
5 Turn the shuttle dial clockwise.
“30.000” flashes.
<REC RATE BASE>
REC RATE | : 30.000 FPS/CAM | |
TIMER RECORDING(DLY) OFF | ||
START | STOP | |
PICTURE QUALITY | : ENHANCED | |
AUDIO RECORDING | : OFF | |
NUMBER OF CAMERAS | : 2 |
|
RECORDING DURATION | : | 0 DAYS |
English
6 Turn the jog dial to select “REC RATE”, and then turn the shuttle dial clockwise.
Set the recording rate for each individual camera. The cursor moves to “TIMER RECORDING (DLY)”.
<REC RATE BASE>
REC RATE : 30.000 FPS/CAM
TIMER RECORDING(DLY) : OFF
START | STOP | |
PICTURE QUALITY | : ENHANCED | |
AUDIO RECORDING | : OFF | |
NUMBER OF CAMERAS | : 2 |
|
RECORDING DURATION | : | 0 DAYS |
7 Turn the shuttle dial clockwise.
“OFF” flashes.
<REC RATE BASE> |
|
| |
REC RATE | 30 |
| FPS/CAM |
TIMER RECORDING(DLY) | : OFF |
| |
START |
| ||
PICTURE QUALITY | : ENHANCED | ||
AUDIO RECORDING | : OFF |
| |
NUMBER OF CAMERAS | : 2 |
|
|
RECORDING DURATION | : | 0 | DAYS |
8 To activate timer operation, turn the jog dial to select “ON”, and then turn the shuttle dial clockwise.
The cursor moves to “START”.
If timer recording has been set to “ON”, set the timer’s “START” and “STOP” with the jog dial or numeric keys.
<REC RATE BASE>
REC RATE | : | 30.000 FPS/CAM | ||
TIMER RECORDING(DLY) : ON | ||||
|
|
|
| |
START | STOP |
| ||
PICTURE QUALITY | : ENHANCED | |||
AUDIO RECORDING | : OFF | |||
NUMBER OF CAMERAS | : 2 |
|
| |
RECORDING DURATION | : |
| 0 DAYS | |
The following settings are carried out with the shuttle dial and jog dial.
zVertical cursor movement: Turn the jog dial.
zCursor movement to the right: Turn the shuttle dial clockwise.
zModification of values: Turn the shuttle dial clockwise, and then with the setting value flashing, turn the jog dial.
zConfirmation of values: Turn the shuttle dial clockwise.
9 Set “PICTURE QUALITY”.
See P.62.
63
