
2VIEWING VIDEO FROM A CAMERA
Viewing with automatic screen selection
Setting automatic full screen selection
Use the following procedure when viewing a full screen to have the displayed video change automatically based on camera numbers.
1 Press the [SEQUENCE] button.
The SEQUENCE indicator starts to flash and the displayed video changes automatically based on camera numbers.
01
02
15
16
zIt is possible to specify the cameras for which automatic selection is to be carried out. (JP.102)
Canceling automatic selection
2 Either press the [SEQUENCE] button once again or press the appropriate [CAMERA SELECT], [QUAD], or [MULTI] button.
Automatic selection ends and the display returns to the normal screen.
Setting automatic
1 Press the [QUAD] button.
The QUAD indicator lights up and the monitor display is divided in four.
QUAD |
|
01 | 02 |
03 | 04 |
2 Press the [SEQUENCE] button.
The content of the split screen will automatically toggle between video from cameras No. 1 through No. 4 and video from cameras No. 5 through No. 8, No. 9 through No. 12 and No. 13 through No. 16
On the
01 | 02 |
03 | 04 |
07 | 08 |
11 | 12 |
15 | 16 |
Returning to normal
3 Press the [SEQUENCE] button once again.
Automatic selection ends and normal
zAutomatic selection cannot be used with playback video.
Viewing on the monitor 2
When a monitor 2 is connected to the monitor 2 output terminal on the digital video recorder’s rear panel, this monitor can be used to view video from a single camera or to automatically scroll through video from all cameras, even if the main monitor is currently displaying video in
Change the monitor 2 setting
1 Press the [MON2] button.
The MON2 indicator lights up.
MON2
CARD
MENU
RESET
EJECT
[MON2] button
English | 21 |