Sanyo DSR-3709 Setting alarm operation and display, Setting alarm display, Example Alarm

3RECORD SET

zThe period for “T-1” through “T-4” as set in step 9 changes to that of “TIME PERIOD A” or “TIME PERIOD B” on P.57.

zWhen time period is unset, T-1 settings are enabled and T-2 through T-4 are disabled.

zThe sensitivity level can be checked using the setting screen. When motion is detected, the sensor color changes from green to red, and a buzzer is sounded. If detection is too sensitive, an alarm can be triggered even by slight changes in lighting; accordingly, the sensitivity level should be set to match the camera location.

Setting alarm operation and display

1 Press the [MENU] button and turn the jog dial to select “2. RECORD SET”, and then turn the shuttle dial.

The <RECORD SET> screen is displayed.

MENU

2 Turn the jog dial to select “8. ALARM OPERATION SET”, and then turn the shuttle dial clockwise.

The <ALARM OPERATION SET> screen is displayed with the cursor positioned on “ALARM RETRIGGER”.

<ALARM OPERATION SET>

ALARM RETRIGGER	: OFF
MAIN MON. DISPLAY	: NC
ALARM PRIORITY	: LAST
MON.2 DISPLAY	: OFF

3 Turn the shuttle dial clockwise.

“OFF” flashes in the “ALARM RETRIGGER” field.

4 Turn the jog dial to set the alarm trigger to “ON”, and then turn the shuttle dial clockwise.

The cursor moves to “MAIN MON. DISPLAY”.

[Settings] (‹ indicates default setting)

Setting	Description
‹OFF	Even if a new alarm is received on the same channel
	during alarm recording, the duration is not extended.

If a new alarm is received on the same channel during alarm recording, the duration is extended and both alarms are treated as one. (Example: Input in the alarm sequence A → C) However, if the new alarm is on a different channel, the alarms are treated separately. (Example: Input in the alarm sequence A → B → C)

	Example:
ON	Alarm				Alarm
	CH1	Alarm Recording A				Alarm Recording C
			Alarm
	CH2			Alarm Recording B

Setting alarm display

1 Turn the jog dial to select “MAIN MON. DISPLAY”, and then turn the shuttle dial clockwise.

“NC” starts to flash for “MAIN MON. DISPLAY”.

<ALARM OPERATION SET>

ALARM RETRIGGER	: ON
MAIN MON. DISPLAY	: NC
ALARM PRIORITY	LAST
MON.2 DISPLAY	: OFF

[Settings] (‹ indicates default setting)

Setting	Description
	When an alarm is detected, the video on the
FULL	channel containing the alarm is displayed in full
	screen format on the main monitor.

9When an alarm is detected, a multi-9 screen display is presented on the main monitor.

When an alarm is detected, a multi-16 screen

16display is presented on the main monitor. (This can only be set on the DSR-3716.)

‹The main monitor’s display does not change when

NC an alarm is detected.

SETTINGS

84 English